Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
We advise you to switch off your television overnight instead of leaving it in stand-by mode. Connecting the mains Insert the mains plug into the wall socket and switch on. Please refer to the label on the back of the television for the correct operating voltage. Installing the remote control • Remove the cover at the back of the remote control. • Insert the correct type and size batteries into the compartment making sure they are the right way around. • You can secure your batteries by fastening an appropriate screw into the hole of the battery cover. Note Clock and wake-up alarm are not available on Pro- Plus sets when television is switched off by mains switch. Accessing the Set-up Menu When the set is in the High Security Mode, the Setup menu can be accessed only by a T374AH Institutional Set-up Remote Control (RG4172BK). When the set is in the Standard Security Mode the Set-up Menu may be accessed with a guest remote control (like the RC2882) by a sequence of commands. Navigation The current menu item can be selected by means of the cursor up and cursor down keys. Submenus can be accessed from menu items with a “” symbol pressing the cursor right key. • Language The Language function is shown in the Menu as "LANGUAGE", and its valid modes are "ENGLISH", "DEUTSCH", "FRANCAIS" and "ITALIANO". • No. of Programs This sub menu allows setting the number of television, PAY-TV Radio and Info programs. The overall maximum number of programs is 125. • Installation When this menu is open, all the protections are inactive. To exit any menu press Menu button. Input The "Input" menu item selects the desired input source that will be assigned to the program. Possible values are Front End, AV1, AV2 and AV2YC (internal interface for system televisions only), and RADIO. System WEST EU (PAL/SECAM-BG) and EAST EU (PAL/ SECAM-DK), UK (PAL-I), FRANCE (SECAM-L/L'). Manual Search Digits can be entered for a frequency in MHz. Right cursor starts an auto search; during frequency entry the digits not yet entered are displayed as dashes "-". Enter “0”for frequencies below 100 MHz. Program no. The programme type can be selected with the cursor left/right buttons. These buttons will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO". If the program number of a certain type is 0, the corresponding type is not displayed. In order to display a program number of the above-mentioned types, always enter two numbers, for example: “01”for TV1 or digit “1”and up/down cursor. Store The present program information is stored after pressing the cursor left/right button. Press Menu to exit without storing. Fine Tune Using the "control left/right" commands starts fine- tuning. Protection This function indicates whether the selected program has a protection or not. With the cursor left/right keys the protection can toggle between "YES" and "NO". Label This menu item will be used to add a label/name for each program. Pressing the left/right buttons you may enter or exi...
Эта инструкция также подходит к моделям:Мониторы - 17HT3304/01 (1.32 mb)
Мониторы - 17HT5404/01Z (1.32 mb)
Мониторы - 21HT3154/01 (1.32 mb)
Мониторы - 21HT3304/01 (1.32 mb)