Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
When the user starts a session, this setting is controlled through the virtual machine. If the Windows Group Policy Object (GPO) is set to allow the keyboard layout setting, the setting is applied during the session of the user. If the Windows GPO is not set to allow the setting, the setting is not applied. 402 Using "PCoIP" 2 2 Using "PCoIP" OSD Tab The OSD page allows the screensaver timeout to be set using the On Screen Display parameter. • The OSD parameters can also be configured using the Administrative Web Interface. • The OSD page is only available on the client. It is unavailable on the host. Figure 2-12: OSD Configuration • Screen-Saver Timeout Configure the screensaver timeout before the client sets the attached displays into low-power mode. You can configure the timeout mode in seconds. The maximum timeout value is 9999 seconds. A setting of 0 seconds disables the screensaver. Display Tab The Display page lets you enable the Extended Display Identification Data (EDID) override mode. This function is only available through the OSD. Under normal operation, the GPU in the host computer queries a monitor attached to the zero client to determine the monitor's capabilities. In some situations, a monitor may be connected to a client in a way that prevents the client from reading the EDID information, such as when connecting through certain KVM devices. The options in this page configure the client to advertise default EDID information to the GPU. Enabling display override forces the default monitor display information to be used which may not be compatible with the connected monitor resulting in a blank monitor. Only enable display override when there is no valid EDID information and monitor display characteristics are known. 412 Using "PCoIP" 2 2 Using "PCoIP" Figure 2-13: Display Configuration • Enable display override This option is intended for legacy systems. It configures the client to send default EDID information to the host when a monitor cannot be detected or is not attached to the client. In versions of Windows prior to Windows 7, once the host had no EDID information, it would assume no monitors were attached and would never recheck. This option ensures that the host always has EDID information when the client is in session. The following default resolutions are advertised when this option is enabled: • 800x600 @60 Hz • 1024x768 @60 Hz (native resolution advertised) • 1280x800 @60 Hz • 1280x960 @60Hz • 1280x1024 @60 Hz • 1600x1200 @60 Hz • 1680x1050 @60 Hz • 1920x1080 @60 Hz • 1920x1200 @60 Hz 422 Using "PCoIP" 2 2 Using "PCoIP" Reset Tab The Reset Parameters page lets you reset configuration and permissions to factory default values stored in onboard flash memory. • Reset can also be initiated using the Administrative Web Interface. • Resetting parameters to factory default values does not revert the firmware or clear the custom OSD logo. Figure 2-14: Reset • Reset Parameters When you click this button, a message will appear prompting you for confirmation. This prevents an accidental reset. 432 Using "PCoIP" 2 2 Using "PCoIP" 2.4.5 Diagnostics Window The Diagnostic menu contains links to pages with run-time information and functions that may be useful for troubleshooting. The Diagnostic options in the OSD are a subset of those available through the Administrative Web Interface. Event Log Session Statistics PCoIP Processor Ping Each tab has a Close button to close the window. Event Log Tab The Event Log page lets you view and clear event log messages from the host or client. The Administrative Web Interface allows you to change the log filter setting on the device which controls the level of detail of the messages in the log. When you set the filter to “terse,” the device will log short and concise messages. The Event Log page allows you to enable and define syslog to collect and report events that meet the IETF standard for logging program messages. The Event Log can also be initiated using the administrative web interface. Figure 2-15: Event Log • View event log message The View event log messages field displays log messages with time stamp information. There are two buttons available. • Refresh Selecting the Refresh button refreshes the event log messages displayed. 442 Using "PCoIP" 2 2 Using "PCoIP" • Clear Click to delete all event log messages stored on the device. Session Statistics Tab The Session Statistics page lets you view current statistics when a session is active. If a session is not active, you can view the statistics from the last session. Session Statistics can also be viewed using the administrative web interface. Figure 2-16: Session Statistics • PCoIP Packets Statistics • PCoIP Packets Sent The total number of PCoIP packets sent in the current/last session. • PCoIP Packets Received The total number of PCoIP packets received in the current/last session. • PCoIP Packets Lost The total number of PCoIP packets lost in the current/last session. • Bytes Statistics • Bytes Se...