Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
9 Control Panel Functions Front Panel Controls W1943TB/W2043TE/W2243T 1 542 3 W1943SB/W2043SE/W2243S 1 542 3 Button Use this button to enter 4:3 IN WIDE, PHOTO EFFECT menus. For more information, refer to page 14. MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. 10 Control Panel Functions Buttons Use these buttons to select or adjust functions in the On Screen Display. Use this function to select optimal image conditions in accordance with the surrounding environment (Brightness, Image type). For more information, refer to page 15. (SOURCE Hot key) When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub. (Only W1943TB/W2043TE/W2243T ) AUTO/SET Button Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is W1943SB/W1943TB : 1360 x 768 W2043SE/W2043TE : 1600 x 900 W2243S/W2243T : 1920 x 1080 Power Button & Use this button to turn the display on or off. Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking red. 11 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: Pops up the menu screen Move where you want to adjust Select a menu icon Adjust the status Exit from the menu screen. 1 2 3 4 Press the MENU Button, then the main menu of the OSD appears. To access a control, use the or Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the / Buttons to adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items. Press the MENU Button once to return to the main menu to select another function. Press the MENU Button twice to exit from the OSD. 12 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. * : Analog Input only 4:3 IN WIDE To adjust the image size Main menu Sub-menu Description MOVIE To select or customize desiredF-ENGINE NORMAL GAUSSIAN BLUR SEPIA MONOCHROME PHOTO EFFECT To adjust the screen color mode * HORIZONTAL * VERTICAL To adjust the position of the screen PRESET (sRGB / 6500K / 9300K) RED GREEN BLUE COLOR To customize the color of the screen BRIGHTNESS CONTRAST GAMMA PICTURE To adjust the brightness, contrast and gamma of the screen INTERNET USER NORMAL DEMO * CLOCK * PHASE SHARPNESS image settings To improve the clarity and stability of the screen TRACKING SETUP LANGUAGE OSD POSITION (HORIZONTAL / VERTICAL) * WHITE BALANCE POWER INDICATOR FACTORY RESET To customize the screen status for a user's operating environment NOTE The order of icons may differ depending on the model (13~19). 13 On Screen Display(OSD) Selection and Adjustment The following OSD screen will appear when you press the button on the front of the monitor. MENU : Exit : Move SET : Select Main menu Description 4:3 IN WIDE To select the image size of the screen. WIDE 4:3 • WIDE : Switch to full screen mode according to input image signal. • 4:3 : Change the input image signal ratio to 4:3. PHOTO EFFECT Use the AUTO/SET button to go to sub-menu. To select the color effects of the screen. • NORMAL The PhotoEffect function is disabled. • GAUSSIAN BLUR This menu changes the screen to be more colorful and smoother. • SEPIA This menu changes the screen to be Sepia tone (brown color). • MONOCHROME This menu changed the screen to be Gray scale(black-and-white Picture) . NORMAL GAUSSIAN BLUR SEPIA MONOCHROME 14 On Screen Display(OSD) Selection and Adjustment The following OSD screen will appear when you press the button on the front of the monitor.This feature lets you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc). Icons Menu Name Sub-menu Name When the F-ENGINE is executed, the screen is split to...
Эта инструкция также подходит к моделям:Мониторы - W1943SB (2.63 mb)
Мониторы - W1943TB-PF (2.63 mb)
Мониторы - W2243T-PF (2.63 mb)
Мониторы - W2243S-PF (2.63 mb)