Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu Sub-menus Menu Name Icons Button Tip MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. A11 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE PICTURE BRIGHTNESS CONTRAST GAMMA MENU : Exit : Decrease : Increase SET : Select another sub-menu To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. COLOR COLOR PRESET RED GREEN MENU : Exit BLUE : Decrease : Increase SET : Select another sub-menu Select the screen color. • sRGB: Set the screen color to fit the SRGB standard color specification. • 6500K: Slightly reddish white. • 9300K: Slightly bluish white. Set your own red color levels. Set your own green color levels. Set your own blue color levels. A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description TRACKING MENU : Exit : Decrease : Increase SET : Select another sub-menu TRACKING HORIZONTAL VERTICAL CLOCK PHASE SHARPNESS To move image left and right. To move image up and down. To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To adjust the clearness of the screen. A13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Main menu Sub menu Description SETUP LANGUAGE SETUP OSD POSITION WHITE BALANCE 4:3 IN WIDE MENU : Exit : Adjust : Adjust SET : Select another sub-menu POWER INDICATOR FACTORY RESET To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. To select the image size of the screen. WIDE 4:3 * 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. (The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3.) Resolution Screen ratio 1280x1024 5 : 4 1152x864 4 : 3 1024x768 4 : 3 800x600 4 : 3 640x480 4 : 3 720x480 3 : 2 The input signal which the 4:3 IN WIDE does not support '4:3' is the following. -The 19 inch monitor is 720x400,1280x768,1360x768, 1440x900 -The 20.1 inch monitor is 720x400,1280x768,1360x768,1680x1050 -The 22 inch monitor is 720x400,1280x768,1360x768,1680x1050 Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. Restore all factory default settings except "LANGUAGE." Press the button to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal. A14 On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you touch the button on the left side of the monitor. Icons Menu Name Sub-menu Name Main menu Sub menu Description MOVIE This feature lets you easily select the best desired INTERNET image condition optimized to the environment (ambient illumination, image types etc). MOVIE: For animation images in videos or movies INTERNET: For text images (Word processing etc.) USER User You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different environment. ... (Brightness): Adjusts screen brightness. ...ACE(Adaptive Clarity Enhancer): Selects the clarity mode. Select the sub-menu using the AUTO/SET button and save the YES value using the , buttons. ...RCM(Real Color Management): Selects the color mode. Not applied Green enhance Flesh tone Color Enhance 0 1 2 3 NORMAL This is under normal operating conditions. DEMO This is just for advertising to customer in the shops. It’s setting is same with Movie mode and screen is divided by half. A15 Troubleshooting Check the following before calling for service. A16 No image appears Do you see a "OSD LOCKED" message on the screen? Is the power cord of the display connected? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE"...
Эта инструкция также подходит к моделям:Мониторы - W1942SM (2.42 mb)