Войти:
Оценок - 4, средний балл: 4.3 ( )

Инструкция по эксплуатации LG, модель M2482D-PZ

Производитель: LG
Размер: 5.15 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


38 3D IMAGING(ONLY CINEMA 3D TV) ENGLISH 3D IMAGING(ONLY CINEMA 3D TV) 3D Technology This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. The viewer must wear compatible 3D glasses in order to see these images in 3D format. NOTE yyAfter powering on the TV, a few seconds may be needed for your TV to calibrate. yyWhen watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART cable. yyIf you set the 3D mode to On while a scheduled recording is performed on digital TV, TV out signals cannot be output through the SCART cable, and the recording cannot be performed. yyIf 3D TV broadcast standard changes in the future and it is not supported by this TV, you may need a separate device, such as a set-top box. 39 MAINTENANCE ENGLISH MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yyMake sure to turn the power off and disconnect the power cord and all other cables first. yyWhen the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust, wipe the surface with a dry and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a clean and dry cloth. CAUTION yyDo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions. yyDo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may damage the screen’s finish and cause discolorations. Cabinet and stand To remove dust, wipe the cabinet with a dry and soft cloth. To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. CAUTION yyDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. yyDo not use any chemicals as this may deteriorate the surface. Power cord Remove the accumulated dust or dirt on the power cord regularly. 40 MAINTENANCE ENGLISH Preventing “Image burn” or “Burn-in” on your TV screen yyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. yyIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. yyAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD) to prevent image burn. 41 TROUBLESHOOTING ENGLISH TROUBLESHOOTING General Problem Resolution Cannot control the TV with the remote control. y y Check the remote control sensor on the product and try again. y y Check if there is any obstacle between the product and the remote control. y y Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. y y Check if the product is turned on. y y Check if the power cord is connected to a wall outlet. y y Check if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. y y Check the power control settings. The power supply may be interrupted. y y Check if the Auto sleep feature is activated in the Time settings. y y If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. Using 3D mode Problem Resolution If you can see a swirling oil-like pattern on the TV when the TV is turned off. This is caused by the interference of external light in the air layer between the LCD surface and 3D filter. The pattern becomes almost invisible when you turn on the power again. If you are not using the glasses provided with the TV. When you view 3D images with this TV, it is very important that you use the glasses provided with the TV. The glasses are designed to compensate optically for the 3D filter attached to the surface of the TV. If you wear third-party glasses, you may not see 3D images properly on the TV. If you view 3D images outside the optimal viewing angle or distance. The optimal viewing angle of this TV is between 12° degrees; the optimal viewing distance is between 50 cm to 150 cm from the TV. When you view 3D images outside the optimal viewing angle or viewing distance, the images may look overlapped or not be displayed properly in 3D. Notes for Viewing 3D Image with 3D Digital Brodcating *In Analogue Brodcating, 3D Imaging does not work. Problem Resolution When switching the 2D image display to the 3D image display with the 3D button on the remote control, the overlapped image may be displayed. y y Disable the 3D imaging mode with the 3D button. y y The 3D imaging mode is ...

Эта инструкция также подходит к моделям:
Мониторы - M2382D-PZ (5.15 mb)
Мониторы - M2482D (5.15 mb)
Мониторы - M2382D (5.15 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории