Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
When pressing these buttons again, the teletext service is appeared. TELETEXT IN DIGITAL SERVICE Press the numeric or PR + or - button to select a certain service which broadcasts digital teletext. Press the TEXT or colour button to switch on teletext. Follow the indications on digital teletext and move onto the next step by pressing OK, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on. Press the TEXT or colour button to switch off digital teletext and return to TV viewing. Some services may allow you to access text services by pressing the RED button. If pressing the MENU, GUIDE or INFO Qbutton, the teletext service disappears temporarily. When pressing these buttons again, the teletext service is appears. News C Main Headtir UK World Politics In Depth UK Regions Health Community 15:13 09 Dec BBC News 24 Press BLUE to change section GO T SHORTCUTS BACK MENU □□SQ 102 APPENDIX TROUBLESHOOTING r 1 The operation does not work normally. The remote control doesn't work ■ Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the set. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR, etc. ■ Install new batteries. Power is suddenly turned off ■ Is the sleep timer set? ■ Check the power control settings. Power interrupted. ■ No broadcast on station tuned with Auto sleep activated. The video function does not work. No picture &No sound ■ Check whether the product is turned on. ■ Try another channel. The problem may be with the broadcast. ■ Is the power cord inserted into wall power outlet? ■ Check your antenna direction and/or location. ■ Test the wall power outlet, plug another product's power cord into the outlet where the product's power cord was plugged in. Picture appears slowly after switching on ■ This is normal, the image is muted during the product startup process. Please contact your service centre, if the picture has not appeared after five minutes. No color, poor colour, or poor picture ■ Adjust Colour in menu option. ■ Keep a sufficient distance between the product and the VCR. ■ Try another channel. The problem may be with the broadcast. ■ Are the video cables installed properly? ■ Activate any function to restore the brightness of the picture. Horizontal/vertical bars or picture shaking ■ Check for local interference such as an electrical appliance or power tool. Poor reception on some channels ■ Station or cable product experiencing problems, tune to another station. ■ Station signal is weak, reorient antenna to receive weaker station. ■ Check for sources of possible interference. Lines or streaks in pictures ■ Check antenna (Change the direction of the antenna). 103 APPENDIX The audio function does not work. Picture OK & No sound ■ Press the VOL + or - button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? No output from one of the speakers ■ Adjust Balance in menu option. Unusual sound from inside the product ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a problem with the product. Only RGB/DVI mode applied No image is displayed. Power is on, power indic-tor is blue but the screen appears extremely dark. ■ Adjust brightness and contrast again. Does the power indicator look blinking amber? ■ If the product is in power saving mode, move the mouse or press any key. Does the ‘Out of range' message appear? ■ The signal from the PC (Video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this user's guide. Does the ‘Check signal cable' message appear? ■ The signal cable between PC and product is not connected. Check the signal cable. ■ Press the ‘INPUT' button in the remote control to check the input signal. 1 04 APPENDIX 'Unknown Product' message appears when the product is connected. Did you install the driver? ■ Install the product driver, which is provided with the product, or download it from the web site. ( ■ See if the plug_&_play function is supported by referring to the video card user's guide. After-image appears on the product. Screen color is abnormal. Screen has poor color res-oluion (16_colors). ■ Set screen color resolution to more than 24 bits (true color) Select control Panel-Display-Settings-Color Table menu in Windows. Screen color is unstable or mono color. ■ Check the connection status of the signal cable. Do back spots appear on the screen? ■ Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. Onl...
Эта инструкция также подходит к моделям:Мониторы - M1962D-PC (7.45 mb)
Мониторы - M1962D-PZ (7.45 mb)
Мониторы - M1962D-WC (7.45 mb)
Мониторы - M2062D-PZ (7.45 mb)