Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
• Off time function overrides On time function if they are set to the same time. • The set must be in off mode for the On time to work. • On time will move on to auto off if no activity is received in 2hours after setting the On time. Note 37 Adjusting the Screen SPECIAL ID to Select the special function Special OK MENU Language Country Child lock DDC-CI XD Demo Language Country Child lock DDC-CI XD Demo To choose the language in which the control names are displayed. Please select your local teletext language. If you don't, the teletext may not appear correctly on the screen. This feature is not available in all countries. Use the buttons to select On or Off. It can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position. In order to unlock it, do the following : * Push the MENU button on the remote control and set Child lock to the 'Off' position. DDC/CI(Display Data Channel Command Interface) is communication protocol for communications between PC and monitor. DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the monitor OSD. Monitor can be adjusted with PC by connecting communication between PC and monitor whenDDC/CI is ON, and monitor cannot be adjusted with PC because communication between PCand monitor is disconnected when DDC/CI is OFF. Use it to see the difference between XD demo on and XD Demo off. (XD Demo function is not available in RGB PC/ DVI PC mode.) 38 Adjusting the Screen SCREEN ID to adjust the screen function Screen OK MENU Auto config. Manual config. ARC Reset To set Auto config. Manual config. ARC Reset This button is for the automatic adjustment of the screen Position, Clock and Phase. (It is not working in RGB-DTV, DVI.) This button is for the manual adjustment of the screen Position, Clock and Phase. • H-Position (It is not working In DVI-PC mode.) To move the displayed image left or right. • V-Position (It is not working In DVI-PC mode.) To move the displayed image up or down. • Clock (It is not working In RGB-DTV, DVI mode.) To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. • Phase (It is not working In RGB-DTV, DVI mode.) To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To select the image size of the screen. • When TV/Video mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2 • When RGB/DVI/Component mode: 4:3, 16:9 Use this function to reset the product to the factory default. However, language selection will not be initialized.(It is working in RGB-PC, RGB-DTV, DVI-DTV mode.) 39 Troubleshooting • Install the product driver, which is provided with the product, or download it from the web site. (• See if the plug&play function is supported by referring to the video card user's guide. Did you install the driver? 'Unknown Product' message appears when the product is connected. • Check if the power cord is properly connected to the outlet. • See if the power switch is turned on. • Adjust brightness and contrast again. • If the product is in power saving mode, move the mouse or press any key. • In DVD Player or Settop Box, check the power status of connected device. • The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this user's guide. * Maximum resolution 19 inch : RGB : 1440 X 900 @75 Hz DVI : 1440 X 900 @60 Hz 20.1 inch : 1680 X 1050 @60 Hz 22 inch : 1680 X1050 @60 Hz • The signal cable between PC and product is not connected. Check the signal cable. • Press the 'INPUT' button in the remote control to check the input signal. Is the product's power cord connected? Is the power indicator turning on? Power is on, power indicator is blue but the screen appears extremely dark. Does the power indicator look amber? Does the 'Out of range' message appear? Does the 'Check signal cable' message appear? No image is displayed Note * Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. * Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. 40 Troubleshooting • If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen saver function. After-image appears when the product is turned off. After-image appears on the product. Is the screen position wrong? Do thin lines appear on the background screen? Hor...
Эта инструкция также подходит к моделям:Мониторы - M208WA-BZ (954.12 kb)
Мониторы - M228WA (954.12 kb)
Мониторы - M228WA-BZ (954.12 kb)