Оценок - 4, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Otherwise, you may execute the ‘ Factory reset’ option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’. 2 Connecting the Display A B C Connect DVI Cable Connect D-sub Cable Connect USB Cable A B AC-IN D-SUB DVI-D C Wall-outlet type Power Cord Analog signal D-sub Digital signal DVI PC-outlet type DVI-D(This feature is not available in all countries.) USB A7 Use USB programs Connecting the USB(Universal Serial Bus) Cable AC-IN D-SUB DVI-D One USB Upstream port Two USB Downstream ports Connect to downstream connectors of desktop or laptop computers, mouse, memory stick or USB hard disk. (However, the computer must support USB and have the USB port.) 1. Elevate the monitor as far as possible follow the arrow to rotate, and plug the USB cable into the monitor. ¦ When connecting multi screens 2. Tidy the USB cable as in the diagram, press(follow the arrow) the cable holder, and open it. 1. Plug in the USB cable as in the diagram. Tidying USB (Universal Serial Bus) Cable 3. Fit the USB cable into the cable holder as in the diagram. Use USB programs Use USB programs The display feature can be used by easily connecting the USB cable between laptops/desktops and the USB port at the back of the monitor. System Requirements In order to make full use of USB Display features, your computer must meet the following minimum system requirements: • 1.2 GHz CPU or higher, 512 MB memory or higher (Recommended Specifications: 1.6 GHz Core2 Duo CPU, 1 GB memory) • USB 2.0 Interface • Windows 2000 (Service Pack 4), Windows XP (Service Pack 2) Operating Systems (O/S) are supported. (But, Windows 98, ME, NT, Vista, Macintosh, Linux Operating Systems (O/S) are not supported.) 1. Connect the USB cable as shown in the picture and press the 'SOURCE' button on the front of the monitor to select the main display. 2. “LG USB Easy Connection” driver installation automatically starts. Before installation, make sure your computer meets the minimum system requirements of Windows 2000 (Service Pack 4) and Windows XP (Service Pack 2). If your computer fails to meet those requirements, update the operating systems at When the “LG USB Easy Connection” program does not install automatically, please install the driver manually as shown below. 1 2 3 4 5 6 If your computer fails to meet the system requirements, the warning message "DisplayLink Core Software" will be displayed. Press the [OK] button, and continue to install "LG USB Easy Connection" program. 3. Install "LG USB Easy Connection" program as the instruction message says, fully remove the USB cable, and then reboot your computer. Without rebooting, "LG USB Easy Connection" will not operate properly. For more detailed information on installation and removal, refer to the accompanied