Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal. A17 On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you touch the button on the right side of the monitor. Icons Menu Name Sub-menu Name Main menu Sub menu Description When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied screen will appear on the right side.Touch the SET button to use the adjusted screen. FLATRON F-ENGINE Screen when applied Screen when not applied MOVIE This feature lets you easily select the best desired TEXT image condition optimized to the environment (ambient illumination, image types etc). MOVIE: For animation images in videos or movies TEXT: For text images (Word processing etc.) To adjust the USER sub-menu function, Press the SET Button BRIGHTNESS ACE 1 2 RCM SAVE USER USER User You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different envir ... (Brightness): Adjusts screen brightness. ...ACE(Adaptive Clarity Enhancer): Selects the clarity mode. ...RCM(Real Color Management): Selects the color mode. Not applied Green enhance Flesh tone Color Enhance 0 1 2 3 Select the SAVE sub-menu using the SET button and save the YES value using the buttons. NORMAL This is under normal operating conditions. A18 Troubleshooting Check the following before calling for service. A19 No image appears Do you see a "OSD LOCKED" message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. Do you see “OSD LOCKED” when you push MENU button? Troubleshooting Display image is incorrect Display Position is • Press the AUTO/SET button to automatically incorrect. adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. • Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. • Press the AUTO/SET button to automatically background, vertical On the screen adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the bars or stripes are vertical bars or stripes using the CLOCK icon in the on screen display. visible. • Press the AUTO/SET button to automatically appearing in any Any horizontal noise adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the image or characters horizontal bars using the PHASE icon in the on portrayed. are not clearly screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). • Check if the signal cable is properly connected The screen color is and use a screwdriver to fasten if necessary. mono or abnormal. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. The screen blinks. • Make sure the power voltage is high enough, It has to be higher than AC100-240V 50/60Hz. A20 Troubleshooting Have you installed the display driver? Have you installed the • Be sure to install the display driver from the display display driver? driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: Do you see an • Make sure to check if the video card supports "Unrecognized monitor, Plug&Play function. Plug&Play (VESA ...
Эта инструкция также подходит к моделям:Мониторы - L1753HR-BF (1.92 mb)
Мониторы - L1753HR-SF (1.92 mb)
Мониторы - L1953HR-SF (1.92 mb)
Мониторы - L1953HR-SF.AEUSQPN (1.92 mb)