Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main menu of the OSD appears. To access a control, use the o r Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the / Buttons to adjust the item to the desired level. Accept the changes by pressing the MENU Button. Exit the OSD by Pressing the MENU Button. A10 On Screen Display(OSD) Selection and Adjustment The following table describes all the On Screen Display control, adjustment, and setting menus. PICTURE Main menu Sub menu BRIGHTNESS Reference To adjust the brightness, contrast and gamma of the screen CONTRAST GAMMA COLOR PRESET sRGB To customize the color of the screen6500K 9300K RED GREEN BLUE POSITION HORIZONTAL To adjust the position of the screenVERTICAL TRACKING CLOCK To improve the clarity and stability, sharpness of the screen PHASE SHARPNESS SETUP LANGUAGE To customize the screen status for a user's operating environment OSD POSITION HORIZONTAL VERTICAL WHITE BALANCE POWER INDICATOR FACTORY RESET : Adjustable A11 NOTE The order of icons may differ depending on the model (A11~A14). On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name PICTURE Sub-menus Icons Button Tip NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE PICTURE BRIGHTNESS Adjusts the brightness of the screen. CONTRAST Adjusts the contrast of the screen. GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. MENU : Exit : Decrease : Increase SET : Select another sub-menu COLOR PRESET COLOR RED GREEN MENU : Exit BLUE : Decrease : Increase SET : Select another sub-menu Selects the color temperature. • sRGB: Set the screen color to fit the SRGB standard color specification. • 6500K: Slightly reddish white. • 9300K: Slightly bluish white. Adjusts red color levels. Adjusts green color levels. Adjusts blue color levels. POSITION HORIZONTAL Adjusts the screen image left and right. VERTICAL Adjusts the screen image up and down. POSITION MENU : Exit : Decrease : Increase SET : Select another sub-menu A13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description MENU : Exit : Decrease : Increase SET : Select another sub-menu TRACKING TRACKING CLOCK PHASE SHARPNESS SETUP LANGUAGE SETUP OSD POSITION WHITE BALANCE SETUP POWER INDICATOR MENU : Exit : Adjust : Adjust SET : Select another sub-menu FACTORY RESET Adjusts any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. Adjusts the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen text. Adjust the clearness of the screen. Chooses the language in which the control names are displayed. Adjusts the position of the OSD window on the screen. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Use this function to set the power indicator light on the front side of the monitor to ON or OFF. Restore all factory default settings except "LANGUAGE." Press the button to reset immediately. A14 Troubleshooting Check the following before calling for service. A15 No image "OSD LOCKED" message on the screen Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed....
Эта инструкция также подходит к моделям:Мониторы - L1918S-BN (4.01 mb)