Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
IPS LED MONITOR MODEL IPS224T IPS234T TABLE OF CONTENTS 2 Contents ENGENGLISH 3 AsseMBLInG AnD PRePAR- InG 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 5 - Detaching the Stand Base 6 - Mounting on a table 6 - Using the cable holder 8 - Mounting on a wall 9 UsInG tHe MonItoR set 9 Connecting to a PC 9 - D-SUB connection 9 - DVI-D connection 11 CUstoMIZInG settInGs 12 Customizing Settings 12 - Menu Settings 13 - PICTURE 14 - COLOR 15 - DISPLAY 16 - OTHERS 17 MY KEY Setting 18 FUNC. Setting 18 - PICTURE MODE 19 - SUPER ENERGY SAVING 20 - DUAL DISPLAY 20 - DUAL WEB 21 - MY KEY SETTING 22 tRoUBLesHootInG 24 sPeCIFICAtIons 24 IPS224T 25 IPS234T 26 Preset Modes (Resolution) 26 Indicator 27 PRoPeR PostURe 27 Proper posture for using the Monitor set. ASSEMBLING AND PREPARING 3 AsseMBLInGAnD PRePARInG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. standBodystandBaseCD(owner'sManual)/ CardD-sUBCable(Thiscableisnotincludedinallcountries.) DVI-DCable(Thiscableisnotincludedinallcountries.) (Dependingonthecountry)(Dependingonthecountry) PowerCordAC-DCAdapterAC-DCAdapteror CAUtIon yyDo not use any unapproved accessories to ensure the safety and product life span. yyAny damages or injuries by using unapproved accessories are not covered by the warranty. note yyThe accessories supplied with your product may vary depending on the model. yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. ENGENGLISH ASSEMBLING AND PREPARING 4 Parts and buttons ENGENGLISH PowerIndicatoryyLightingon:turnedonyyLightingoff:turnedoffConnectionpanel(Seep.9) Button(Seep.11) (PowerButton) 5 ENEGNLGISH ASSEMBLING AND PREPARING Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. Setting up the Monitor set Attaching the S tand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. CAUTION 2 Stand Base Stand Body 1 2 3 Detaching the S tand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Stand Base Stand Base Stand Body Stand Body Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. 1 2 3 2 6 ENEGNLGISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) button on the bottom switch panel to turn the power on. 10 cm 10 cm 10 cm 10 cm Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. CAUTION Cable holder or ASSEMBLING AND PREPARING 7 UsingtheKensingtonsecuritysystem Whenyouadjusttheangle,donotholdthebottomoftheMonitorsetframeasshownonthefollowingillustration,asmayinjureyourfingers. Donottouchorpressthescreenwhenadjustingtheangleofthemonitor. Donotholdthissetlikebelowpicture.Monitorscreencandetachfromstandbaseandinjureyourbody. wARnInGTiltfrom+20to-5degreesupordowntoadjusttheangleoftheMonitorsettosuityourview. noteFrontRear The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visitConnect the Kensington security system cable between the Monitor set and a table. TheKensingtonsecuritysystemisoptional. Youcanobtainitfrommostelectronicsstores. note ENGENGLISH ENGENGLISH ENGENGLISH ASSEMBLING AND PREPARING 8 Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESAStandards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESAcompatible. 5 PleaseuseVESAstandardasbelow. yy784.8 mm (30.9 inch) and under * Wall Mount Pad Thickness : 2.6 mm * Screw : . 4.0 mm x Pitch 0.7 mm x Length 10 mm yy787.4 mm (31.0 inch) and above * Please ...
Эта инструкция также подходит к моделям:Мониторы - IPS224T (6.74 mb)
Мониторы - IPS224T-PN (6.74 mb)
Мониторы - IPS234T (6.74 mb)