Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
LED LCD MONITOR MODEL E2242V E2342V E2442V E2742V 2 ENG ENGLISH TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 6 - Detaching the Stand Base 7 - Mounting on a table 7 - Using the cable holder 9 - Mounting on a wall 10 USING THE MONITOR SET 10 Connecting to a PC 10 - D-SUB connection 10 - DVI-D connection 10 - HDMI connection 12 CUSTOMIZING SETTINGS 13 Customizing Settings 13 - Menu Settings 14 - PICTURE 15 - COLOR 16 - DISPLAY 16 - VOLUME 17 - OTHERS 18 SUPER ENERGY SAVING Setting 19 PICTURE MODE Setting 20 TROUBLESHOOTING 22 SPECIFICATIONS 22 E2242V 23 E2342V 24 E2442V 25 E2742V 26 Preset Modes (Resolution) 26 Indicator 27 PROPER POSTURE 27 Proper posture for using the Monitor set. 3 ASSEMBLING AND PREPARING ENG ENGLISH ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. DVI-D Cable (This cable is not included in all countries.) D-SUB Cable CD(Owner's Manual) / Card or ( Depending on the country ) ( Depending on the country ) AC-DC Adapter AC-DC Adapter Power Cord Stand Base Stand Body Stand Body Two Screws CAUTION yyDo not use any unapproved accessories to ensure the safety and product life span. yyAny damages or injuries by using unapproved accessories are not covered by the warranty. NOTE yyThe accessories supplied with your product may vary depending on the model. yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. ASSEMBLING AND PREPARING 4 ENG ENGLISH Parts and buttons Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.12) Connection panel (See p.10) Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. E2742V Attach the Stand Body to the monitor set. Use two screws to fix the Stand Body and monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. 1 2 3 4 CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Stand Body 2 E2242V/E2342V/E2442V Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. 1 2 3 Stand Body Stand Body Stand Base Stand Base Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. E2742V Turn the screw to the left with a coin. Pull out the Stand Base from the Stand Body. Remove two screws and pull out the Stand Body from the monitor set. 1 2 3 2 E2242V/E2342V/E2442V Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. 1 2 Stand Body 3 Stand Base Stand Body Stand Base Stand Body Stand Body Stand Base CAUTION yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 3 Press (Power) button on the bottom switch panel to turn the power on. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. 10 cm 10 cm 10 cm 10 cm Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. Cable holder or WARNING Using the Kensington security system When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit Connect the Kensington security system cable between the Monitor set and a table. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. NOTE The Kensington security system is optional. You can obtain it from most electronics stores. NOTE Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Rear Front Model E2442VE2742V VESA (A x B) 75 x 75 100 x 100 Standard screw M4 Number of screws 4 Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. E2242V E2342V CAUTION 10 cm yyDisconne...
Эта инструкция также подходит к моделям:Мониторы - E2342V-BN (3.37 mb)
Мониторы - E2442V (3.37 mb)
Мониторы - E2442V-BN (3.37 mb)
Мониторы - E2742V (3.37 mb)