Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации LG, модель E2210S-BN

Производитель: LG
Размер: 4.51 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


• Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Display image is incorrect Troubleshooting The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. 26 27 48.2 cm (19 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 48.2 cm 0.294 x 0.294 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. Digital Sync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Video Input Max VESA 1280 x 1024 @75 Hz Recommend VESA 1280 x 1024 @60 Hz Resolution Plug&Play On Mode : 25 W(Typ.) Sleep Mode .0.2 W Off Mode .0.15 W Power Consumption Operating Conditions Temperature 10 °C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 °C to 60 °C Humidity 5 % to 90 % non-Condensing Environment al Conditions With Stand Width 40.89 cm ( 16.10 inch) Height 42.95 cm ( 16.91 inch) Depth 25.00 cm ( 9.84 inch) Weight(excl. packing) 2.8 kg (6.26 lb) Dimensions & Weight Tilt : -5° to 15°Range AC 100-240 V~ 50 / 60 Hz 0.8 APower Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B(Digital),DDC2AB(Anlaog) Without Stand Width 40.89 cm ( 16.10 inch) Height 33.81 cm ( 13.31 inch) Depth 5.82 cm ( 2.29 inch) NOTE Information in this document is subject to change without notice. Specifications E1910T 28 48.2 cm (19 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 48.2 cm 0.294 x 0.294 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. Sync Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Video Input Max VESA 1280 x 1024 @75 Hz Recommend VESA 1280 x 1024 @60 Hz Resolution Plug&Play On Mode : 25 W(Typ.) Sleep Mode .0.2 W Off Mode .0.15 W Power Consumption Operating Conditions Temperature 10 °C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 °C to 60 °C Humidity 5 % to 90 % non-Condensing Environment al Conditions With Stand Width 40.89 cm (16.10 inch) Height 42.95 cm (16.91 inch) Depth 25.00 cm ( 9.84 inch) Weight(excl. packing) 2.8 kg (6.26 lb) Dimensions & Weight Tilt : -5° to 15°Range AC 100-240 V~ 50 / 60 Hz 0.8 APower Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2AB Without Stand Width 40.89 cm (16.10 inch) Height 33.81 cm (13.31 inch) Depth 5.82 cm ( 2.29 inch) NOTE Information in this document is subject to change without notice. Specifications E1910S 29 55.8 cm (22 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.8 cm 0.282 x 0.282 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. Digital Sync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Video Input Max VESA 1680 x 1050 @60 Hz Recommend VESA 1680 x 1050 @60 Hz Resolution Plug&Play On Mode : 28 W(Typ.) Sleep Mode .0.2 W Off Mode .0.15 W Power Consumption Operating Conditions Temperature 10 °C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 °C to 60 °C Humidity 5 % to 90 % non-Condensing Environment al Conditions With Stand Width 50.64 cm ( 19.94 inch) Height 42.49 cm ( 16.73 inch) Depth 20.99 cm ( 8.26 inch) Weight(excl. packing) 3.5 kg (7.87 lb) Dimensions & Weight Tilt : -5° to 15°Range AC 100-240 V~ 50 / 60 Hz 1.0 APower Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B(Digital),DDC2AB(Anlaog) Without Stand Width 50.64 cm ( 19.94 inch) Height 33.32 cm ( 13.12 inch) Depth 6.04 cm ( 2.38 inch) NOTE Information in this document is subject to change without notice. Specifications E2210T 30 55.8 cm (22 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.8 cm 0.282 x 0.282 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz ...

Эта инструкция также подходит к моделям:
Мониторы - E1910S (4.51 mb)
Мониторы - E1910S-BN (4.51 mb)
Мониторы - E2210S (4.51 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории