Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Important Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Troubleshooting Display image is incorrect The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Display image is incorrect The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Have you installed the display driver? Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. A23 Specifications W2253V Display 21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 54.6 cm 0.248*0.248 mm pixel pitch Sync Input Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. Analog,Digital : 56 - 75 Hz (Automatic) HDMI : 56 - 61 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) Video Input Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) 19 pin HDMI Connector Input Form Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI Max Analog : VESA 1920 x 1080 @60 Hz Resolution Digital : VESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B (Digital,HDMI), DDC 2AB (Analog) Power On Mode : 40 W(Typ.) Consumption Sleep Mode . 1 W Off Mode . 1 W With Stand Without Stand Dimensions &Weight Width 52.25 cm / 20.57 inches 52.25 cm / 20.57 inches Height 39.63 cm / 15.60 inches 33.66 cm / 13.25 inches Depth 19.80 cm / 7.79 inches 6.05 cm / 2.38 inches Net 4.0 kg (8.82 lbs) Tilt Range Tilt -5°~15° Power Input AC 100-240V~ 50/60Hz 1.0A Environmental Operating Conditions Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Attached( ), Detached ( O ) Power cord Wall-outlet type A24 NOTE Information in this document is subject to change without notice. Specifications W2353V Display 23.0 inches (58.4 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm 0.266*0.266 mm pixel pitch Sync Input Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. Analog,Digital : 56 - 75 Hz (Automatic) HDMI : 56 - 61 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) Video Input Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) 19 pin HDMI Connector Input Form Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI Resolution Max Analog : VESA 1920 x 1080 @60 Hz Digital : VESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B (Digital,HDMI), DDC 2AB (Analog) Power On Mode : 42 W(Typ.) Consumption Sleep Mode . 1 W Off Mode . 1 W Dimensions With Stand Without Stand &Weight Width 55.85 cm / 21.98 inches 55.85 cm / 21.98 inches Height 41.75 cm / 16.43 inches 36.30 cm / 14.29 inches Depth 19.80 cm / 7.79 inches 7.53 cm / 2.96 inches Net 4.5 kg (9.92 lbs) Tilt Range Tilt -5°~15° Power Input AC 100-240V~ 50/60Hz 1.0A Environmental Operating ConditionsConditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Attached( ), Detached ( O ) Power cord Wall-outlet type A25 NOTE Information in this document is subject to change without notice. Specifications Preset Modes (Resolution) DSUB/DVI Timing Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 720 x 400 31.468 7...
Эта инструкция также подходит к моделям:Мониторы - W2253V (5.18 mb)
Мониторы - W2253V-PF (5.18 mb)
Мониторы - W2353V-PF (5.18 mb)