Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации LG, модель 0961417

Производитель: LG
Размер: 1.26 mb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu —I PICTURE COLOR TRACKING '■ 0 m m SETUP On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description * PICTURE PICTURE DSUB/DVI input BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. BLACK LEVEL You can set the offset level. If you select 'HIGH', the screen will be bright and if you select ‘LOW', the screen will be dark. (only for HDMI input) * Offset? As the criteria for video signal, it is the darkest screen the monitor can show. ■ MENU : Exit ■ T : Decrease ■ k : Increase ■ SET: Select another sub-menu m COLOR PRESET i MENU : Exit I: Decrease : Increase i SET: Select another sub-menu n RED H GREEN n BLUE • sRGB: Set the screen color to fit the SRGB standard color specification. • 6500K: Slightly reddish white. • 9300K: Slightly bluish white. Set your own red color levels. Set your own green color levels. Set your own blue color levels. On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description TRACKING HORIZONTAL To move image left and right. VERTICAL To move image up and down. i MENU : Exit i ▼ : Decrease i A : Increase i SET: Select another sub-menu CLOCK To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. SHARPNESS To adjust the clearness of the screen. TRACKING On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description SETUP LANGUAGE OSD POSITION WHITE BALANCE DSUB/DVI input MENUS3 TH AB sei-m & □ WHITE BALANCE ► NO HDMI input OVERSCAN RTC ■ MENU : Exit ■ T : Adjust ■ k : Adjust nnxum ■ SET: Select another sub-menuPOWER INDICATOR To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. (only for DSUB input) To select the range of output image for DTV timing in HDMI input. (only for HDMI input) Recommend overscan function to turn on when connect AV equipment. If you set ON, you enable the Response Time Control function. If you set OFF, you disable the Response Time Control function. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. FACTORY RESET Restore all factory default settings except "LANGUAGE." Press the buttons to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal. SETUP On Screen Display(OSD) Selection and Adjustment ■ ■■ The OSD screen will appear when you touch the FUN button on the right bottom of the monitor. DSUB/DVI input EZ ZOOMING 4:3 IN WIDE □ PHOTO EFFECT CINEMA MODE TIME CONTROL ► OFF Q HDMI input PHOTO EFFECT VOLUME TIME CONTROL ► OFF Q Main menu Sub menu Description EZ ZOOMING EZ Zoom lowers the display's resolution in single-step increments. Depressing the button once lowers the resolution by one step; while a second button-press returns the resolution to the original display settings. *This function is operated only if the forteManager is installed to PC. *ForteManager is not supported in HDMI input. EZ ZOOMING 4:3 IN WIDE To select the image size of the screen. WIDE : Switch to full screen mode according to input image signal. » 4 : 3 : Change the image signal ratio into 4:3. On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PHOTO EFFECT To select the color of the screen. NORMAL GAUSSIAN BLUR SEPIA MONOCHROME • NORMAL: The PhotoEffect function is disabled. • GAUSSIAN BLUR : This option is to add the effect to the screen that the dark and sharp image becomes brighter and more blurred. • SEPIA : This option changes the screen to be Sepia tone. The Sepia tone is brown color tone. •MONOCHROME : This option changed the screen to be Gray tone. The screen image is displayed with just white, black, gray colors. *Photo Effect feature may not work in HD...

Эта инструкция также подходит к моделям:
Мониторы - W2261VG-PF (1.26 mb)
Мониторы - W2261VP (1.26 mb)
Мониторы - W2261VP-PF (1.26 mb)
Мониторы - W2361V-PF (1.26 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории