Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Do not clean Flat monitor with water. Use a water-diluted mild detergent. (Some detergents contain significant amounts of alcohol-based solvents, which can damage (color change) or crack the monitor case. The antiglare/anti-static surface coating on the CDT may also be affected.) Dilute the detergent (1:10 ratio) with water before using. When cleaning the monitor case or the surface of the CDT, wipe with a slightly moistened, soft fabric. Do not clean Flat monitor with water. Use a water-diluted mild detergent. (Some detergents contain significant amounts of alcohol-based solvents, which can damage (color change) or crack the monitor case. The antiglare/anti-static surface coating on the CDT may also be affected.) Dilute the detergent (1:10 ratio) with water before using. Notational Power Installation Clean Others Do not water or spray detergent directly on the monitor. Use the recommended detergent with a smooth cloth. • You can prevent the coated CDT from being damaged or the monitor cabinet from being dissolved, cracked or discolored. • You can buy a recommended detergent at any Samsung Service Center. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. • A dirty connector can cause an electric shock or fire. Do not set a glass of water, chemicals or any small metal objects on the monitor. • This may cause damage, electric shock or a fire. • If a foreign substance gets into the monitor, disconnect the plug and then contact a service center. Notational Power Installation Clean Others Do not remove cover(or back). • This may cause an electric shock or fire. • Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. • This may cause an electric shock or fire. Do not place any heavy objects on the monitor. • This may cause an electric shock or fire. For each hour of looking at the monitor, you should let your eyes rest for 5 minutes. • This will reduce eye fatigue. Do not use or store inflammable substances near the monitor. • This may cause an explosion or fire. Do not try to move the monitor by pulling on the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or thesignal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. Keep the monitor away from any magnetic substances. • This may cause discoloring or distortion of the image. SyncMster 591S / 793S / 591V / 793V / 793DF / 795DF / 797DF / 997DF / 793MB / 795MB Monitor and Stand Power Cord Unpacking Front Rear Bottom (Some models include a stand attached. ) Please make sure the following items are includedwith your monitor. If any items are missing, contact your dealer. Stand Quick Setup Guide Warranty Card (Not available in all locations) User's Guide, Monitor Driver SyncMaster 783DF For Multimedia model (Option) Multimedia Speaker Stand Sound Cables(2each) DC Power Cord User Guide SyncMster 591S / 793S / 591V / 793V / 793DF / 795DF / 797DF / 997DF / 793MB / 795MB Unpacking Front Rear Bottom 1. Menu button Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu. 2. Adjust buttons These buttons allow you to highlight and adjust items in the menu. 3. Enter button Used to select the OSD menu. 4. Power button Use this button for turn the monitor on and off. 5. Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. SyncMaster 783DF General 793DF/797DF/997DF/793MB/795MB SyncMaster 591S/793S/591V/793V/783DF/795DF General 793DF/797DF/997DF/793MB/795MB SyncMaster 591S/793S/591V/793V/783DF/795DF Unpacking Front Rear Bottom (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal Cable Connect the signal cable to the video port on your computer, video board, video card, or graphics card. SyncMaster 997DF BNC Connectors (Option) (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin D-sub connector on the back of your monitor. 3. BNC Connectors Connect the signal cable to the BNC signal port on the back of your (Option) monitor. Note: See Connecting the Monitor f...
Эта инструкция также подходит к моделям:Мониторы - 591S (5.52 mb)
Мониторы - 591V (5.52 mb)
Мониторы - 793DF (5.52 mb)
Мониторы - 793MB (5.52 mb)