|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The color has been changed after changing the graphics card. Did you install the device driver for the product? Windows XP : Set the color again by selecting Control Panel ^ Appearance and Themes ^ Display ^ Settings. Windows ME/2000 : Set the color again by selecting Control Panel ^ Display ^ Settings. Windows Vista : Change the color settings by selecting Control Panel ^ Appearance and Personalization ^ Personalization ^ Display settings. Windows 7 : Change the color settings by selecting Control Panel ^ Appearance and Personalization ^ Display ^ Adjust resolution ^ Advanced settings ^ Monitor. (For more information, refer to the Windows user manual for the computer.) Is the graphics card configured correctly? Configure the color again in accordance with the new graphics card driver. When I connect the monitor, the 'Unknown monitor, Plug&Play (VESA DDC) monitor found' message is displayed. Did you install the device driver for the product? Install the device driver referring to the descriptions about the driver installation. Check if all the Plug&Play (VESA DDC) functions are supported referring to the User Manual of the graphics card. Install the device driver referring to the descriptions about the driver installation. When I look at the exterior edges of the product, small alien substances appear on it. Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black edges, such things may be seen. This is not a defect of the product. A “beep, beep” sound is heard when booting the computer. If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer. 5-2 Troubleshooting 5-3 FAQ FAQ! PLEASE TRY THE FOLLOWING! How can I change the frequency (refresh rate) of the video signal? You have to change the frequency of the graphics card. Windows XP : Change the frequency by selecting Control Panel ^ Appearance and Themes ^ Display ^ Settings ^ Advanced ^ Monitor, and then change the refresh rate under Monitor Settings. Windows ME/2000 : Change the frequency by selecting Control Panel ^ Display ^ Settings ^ Advanced ^ Monitor, and then change the refresh rate under Monitor Settings. Windows Vista : Change the frequency by selecting Control Panel ^ Appearance and Personalization ^ Personalization ^ Display settings ^ Advanced settings ^ Monitor, and then change the refresh rate under Monitor Settings. Windows 7 : Change the frequency by selecting Control Panel ^ Appearance and Personalization ^ Display ^ Adjust resolution ^ Advanced settings ^ Monitor, and then change the refresh rate under Monitor Settings. (For more information, refer to the User Manual of the computer or the graphics card.) How can I change the resolution? Windows XP : Change the resolution by selecting Control Panel ^ Appearance and Themes ^ Display ^ Settings. Windows ME/2000 : Change the resolution by selecting Control Panel ^ Display ^ Settings. Windows Vista : Change the resolution by selecting Control Panel ^ Appearance and Personalization ^ Personalization ^ Display settings. Windows 7 : Change the resolution by selecting Control Panel ^ Appearance and Personalization ^ Display ^ Adjust resolution. (For more information, refer to the User Manual of the computer or the graphics card.) How can I use the power saving function? Windows XP : Configure it by selecting Control Panel ^ Appearance and Themes ^ Display ^ Screen Saver Setting or configure it in the BIOS Setup of the computer. Windows ME/2000 : Configure it by selecting Control Panel ^ Display ^ Screen Saver Setting or Configure it in the BIOS Setup of the computer. Windows Vista : Change settings by selecting Control Panel ^ Appearance and Personalization ^ Personalization ^ Screen Saver. You can also use the BIOS SETUP menu on the PC. Windows 7 : Change settings by selecting Control Panel ^ Appearance and Personalization ^ Personalization ^ Screen Saver. You can also use the BIOS SETUP menu on the PC. (For more information, refer to the Windows user manual for the computer.) Troubleshooting 5-3 6 More Information 6-1 Specifications MODEL NAME BX1950 LCD Panel Size 18.5 inches (47 cm) Display area 409.8 mm (H) x 230.4 mm (V) Pixel Pitch 0.300 mm (H) x 0.300 mm (V) Synchroniza- tion Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.7 M Resolution Optimum resolution 1360x768 @ 60 Hz Maximum resolution 1360x768 @ 60 Hz Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 0.7 Vp-p ± 5% separate H/V sync, Composite, SOG TTL level (V high > 2.0V, V low < 0.8V) Maximum Pixel Clock 89MHz (Analog,Digital) Power Supply This product supports 100-240 V.Since the standard voltage may differ from country to country, please check the label on the back of the product. Signal Cable 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (WxHxD) / Weight 4...
Эта инструкция также подходит к моделям:Мониторы - BX1950 (1.5 mb)
Мониторы - BX1950N (1.5 mb)
Мониторы - BX2050 (1.5 mb)
Мониторы - BX2050N (1.5 mb)