Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Speaker 1. SOURCE Press the 'SOURCE' button to change the input signal source. Changing the source is allowed only in external devices that are connected to the monitor at the time. To switch Screen modes: [PC] .. [DVI] .. [TV] .. [Ext.] .. [AV] .. [S-Video] .. [Component] >>Click here to see an animation clip According to broadcasting type in each country, you may not be able to choose. For more information > Broadcasting Systems 2. PIP - Available in PC/DVI Mode In PC mode, turns on Video or TV screens in PIP mode. >>Click here to see an animation clip 3. MENU Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 4. CH Moves from one menu item to another vertically or adjusts selected menu values. In TV mode, selects TV channels. >>Click here to see an animation clip 5. - VOL + Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume. >>Click here to see an animation clip 6. [ ] Enter button Activates a highlighted menu item. 7. [ ] Power button Use this button to turn the monitor on and off. 8. Power indicator Power indicator shows PowerSaver mode by green blinking. 9. Remote Control Sensor Aim the remote control towards this spot on the monitor. 10. Speaker You can hear sound by connecting the soundcard of your PC to the monitor. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods. Rear 1. POWER (The configuration at the back of the monitor may vary from product to product.) Power terminal Connect the power cord for your monitor to the POWER on the back of the monitor. This product may be used with 100 ~ 240VAC(+/- 10%). 2. DVI/PC IN DVI/PC IN 1. DVI(HDCP) : Connect the DVI cable to the DVI(HDCP) port on the back of your monitor. 2. RGB : Connect the signal cable to the RGB port on the back of your monitor. 3. AUDIO : PC sound terminal (input) 3. EXT(RGB) External device terminal EXT(RGB) is mainly used in Europe. As for EXT(RGB) port of the monitor, it makes TV or Video signal input and output. 4. COMPONENT IN COMPONENT IN 1. R - AUDIO - L : DVD/DTV sound input terminal (left/right) 2. PR, PB,Y : DVD/DTV video input terminal(PR, PB,Y) 5. ANT IN ANT IN Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor. Make sure to use a TV antenna cable (sold separately) as the antenna cable. 6. / S-VIDEO / VIDEO / L - AUDIO - R 1. : Headphone sound output terminal 2. S-VIDEO : External device (S-video) input terminal 3. VIDEO : External device (video) input terminal 4. L - AUDIO - R : External device sound input terminal 7. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchaseit. See Connecting the monitor for further information regarding cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic device operated near the monitor, causing malfunction due to interference with frequency. 1. POWER 2. Number button 3. +100, -/-4. - + 5. MUTE 6. TTX/MIX 7. MENU 8. ENTER 9. CH/P 10. SOURCE 11. INFO 12. EXIT 13. Up-Down Left-Right buttons 14. AUTO 15. P.MODE, M/B (MagicBright™) 16. P.SIZE 17. STILL 18. PIP 19. S.MODE 20. DUAL/MTS 21. PRE-CH 22. SOURCE 23. SIZE 24. POSITION 25. MAGIC-CH 1. POWER Use this button to turn the monitor on and off. 2. Number button Selects TV channels in the TV mode. Used to change channels when PIP is selected and the PIP Source is set to TV. 3. +100 Press to select channels over 100. For example, to select channel 121, press "+100", then press "2" and "1". -/--(One/Two-Digit channel selection ) Use to select a channel numbered ten or over. Press this button, and the "--" symbol is displayed. Enter the two-digit channel number. This function is available only in Europe. 4. - + Adjusts the audio volume. 5. MUTE Press to mute the sound temporarily. Displayed on the bottom left of the screen. Press the MUTE button again to cancel the Mute function. Alternatively press the - + buttons to cancel the Mute function. 6. TTX/MIX TV channels provide written information services via teletext. For more information > TTX / MIX This function is available only in Europe. 7. MENU Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 8. ENTER Activates a highlighted menu item. 9. CH/P In TV mode, selects TV channels. 10. SOURCE Press the 'SOURCE' button to change the input signal source. Changing the source is allowed only in external devices that are connected to the monitor at the time. 11. INFO Current picture information is displayed on the upper left corner of the screen. 12. EXIT Exits from the menu screen. 13. Up-Down Left-Right...