Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
(Refer to the Connecting Your Monitor) ..Ensure that the PC or video sources are turned on. "Video mode not supported" message ..Check the maximum resolution and the frequency of the video adaptor. ..Compare these values with the data in the Preset Timing Modes Chart. Picture rolls vertically. ..Check if the signal cable is securely connected. Connect it again securely.(Refer to Connecting to a Computer) Image is not clear. Picture isblurred. ..Run Frequency Coarse and Fine tuning. ..Turn on again after removing all accessories (video extension cable, etc.) ..Set resolution and frequency to the recommended ranges. 17 inch wide model (1280 x 768 @ 60Hz) Picture image is unstable andvibrates. ..Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes.Ghost images are shown in thepicture. The image is too light or too dark ..Adjust the Brightness and Contrast. (Refer to the Brightness, Contrast) Screen color is inconsistent. ..Adjust color using Custom Color under OSD Color Adjustment menu. Color image is distorted withdark shadows. White color is poor. Power Indicator blinks green. ..The monitor is currently saving the changes made in settings to the OSD memory. Screen is blank and powerindicator light is steady green orblinks every 0.5 or 1 seconds ..The monitor is using its power management system. ..Move the computer's mouse or press a key on the keyboard Problems Solutions English > Main > Troubleshooting > Problems and Solutions The image is too light or too dark ..Adjust the Brightness and Contrast. (Refer to the Brightness, Contrast) Screen color is inconsistent. ..Adjust color using Custom Color under OSD Color Adjustment menu. Color image is distorted withdark shadows. White color is poor. Power Indicator blinks green. ..The monitor is currently saving the changes made in settings to the OSD memory. Screen is blank and powerindicator light is steady green orblinks every 0.5 or 1 seconds ..The monitor is using its power management system. ..Move the computer's mouse or press a key on the keyboard Problems Solutions English > Main > Troubleshooting > Problems and Solutions Check before calling for service Problems and Solutions Q & A 3. Problems related to Audio Problems related to audio signals and their solutions are listed below. Problems Solutions No sound ..Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card. (Refer to the Connecting Your Monitor) ..Check the volume level. (Refer to the Volume) Sound level is too low. ..Check the volume level. (Refer to the Volume) ..If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. Sound is too high pitched or toolow pitched ..Adjust the Treble and Bass to appropriate level. 4. Problems related to Remote Control Problems related to the remote control and their solutions are listed. Problems Items to check The remote control buttons do not respond. ..Check the battery polarities (+/-). ..Check if the batteries have been exhausted. ..Check if the power is on. ..Check if the power cord is securely connected. ..Check if a special fluorescent or neon lamp is on in the vicinity. Check before calling for service Problems and Solutions Q & A English > Main > Troubleshooting > Q & A Frequently asked questions are summarized here for your reference. QuestionAnswerHow can I change the frequency? Frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows XP: Reset resolution by clicking Control Panel Appearance & Theme Display Settings. Windows ME/2000: Set the resolution at the Control Panel Display Settings. * Contact the video card manufacturer for details. How can I set the Power Saving function? Windows XP: Reset Power Saving parameters by clicking Control Panel Appearance & Theme Display Screen Saver or in the computer BIOS SETUP. (Refer to Windows/Computer Manual) Windows ME/2000: Set the function at BIOS-SETUP of the computer or the screen saver. (Refer to Windows/Computer Manual). How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water. Do not leave any remains of the detergent nor scratch the case. Do not allow any water to go inside the monitor. English > Main > Specifications > General Specifications Design and specifications are subject to change without prior notice. General Model Name SyncMaster 173MP LCD Panel Size 17.0 inch (Diagonal) English > Main > Specifications > General Specifications Design and specifications are subject to change wit...