Оценок - 1, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The PXE sever provides a client/server interface based on TCP/IP, DHCP, and TFTP. It allows an administrator at a remote location to configure and boot the operating system onto a client over a network. □ Implement a PXE server. □ Save the Windows Embedded Standard image and the Backup/Recovery Utility which will be recovered later onto the PXE server. □ Boot the client via the network. □ Recover the system using the Windows Embedded Standard image and the Backup/Recovery Utility saved on the PXE server via the network. __ For more information, refer to the PXE Server User Manual. 2 Using "Windows Embedded Standard 7" (TB-WH) 37 2.4 MagicRMS Pro 2.4.1 About MagicRMS Pro The MagicRMS Pro program can be used to remotely control a Samsung network monitor. The design of the user-oriented interface makes it easy and convenient to use. Using MagicRMS Pro, you can schedule a task to be performed at a specified time on a network monitor. Also, you can manage multiple network monitors efficiently by grouping or filtering them according to specific conditions. To use the MagicRMS Pro Solution or MagicRMS Pro Agent and to view the user guide, visit Go to Support>Download Center, and search for MagicRMS to download. Open source license notice In the case of using open source software, Open Source licenses are available on the MagicRMS Pro Agent. Open Source License Notice is written only English. 2 Using "Windows Embedded Standard 7" (TB-WH) 38 3.1 About "Zero Client" The "Zero Client" uses a Linux operating system. When the Client connects to a server where the Citrix XendDesktop/XenApp service is available, information relating to the keyboard, mouse, audio/video and display data is transmitted from the Client to the server over the network. Compatible servers • Citrix XenDesktop/XenApp server □ Microsoft Windows 2000/2003/2008 server where the Terminal Service and Citrix XenServer are installed 3 Using the "Zero Client" (TB-CH) 39 3.2 Connection to Use the "Zero Client" 3.2.1 Before Connecting Pre-connection Checkpoints • Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. • Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. • Check the types of ports at the back of the product you want to connect. • The port names may vary depending on the monitor. • For details on how to change the input source for your monitor, refer to the monitor user manual. • The monitor images in this manual are for reference only. Monitor is sold separately. 3 Using the "Zero Client" (TB-CH) 40 3.2.2 Connection Using the D-SUB Cable (Analogue Type) 1 Connect the D-SUB cable to [RGB IN] on the back of the monitor and [RGB OUT] on the stand base. 3.2.3 Connection Using the DVI Cable 1 Connect the DVI cable to [DVI IN] on the back of the monitor and [DVI OUT] on the stand base. 3 Using the "Zero Client" (TB-CH) 41 Using the "Zero Client" (TB-CH) 3.2.4 Connecting a Microphone 1 Connect the microphone to [MIC] on the right side of the stand base. 3.2.5 Connecting to Headphones or Speakers 1 Connect an audio output device (headphones or speakers) to [AUDIO OUT] on the back or Q on the right side of the stand base. 3 Using the "Zero Client" (TB-CH) 42 3.2.6 Connecting to a Server (LAN/USB Connection) 1 Connect the [LAN] port on the back of the stand base to the server using the LAN cable. Hjjj • It is not supported when the network speed is below or equal to 10Mbps. • Ensure you use the CAT 5 (*STP type) cable. *Shielded Twist Pair 2 Connect USB devices (keyboard, mouse, etc.) to [^] on the back or right side of the stand base. (To use the [ ] port, ensure the Client is connected to the server.) 3 Using the "Zero Client" (TB-CH) 43 3.2.7 Connecting the Power n* • The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. • The monitor images in this manual are for reference only. Monitor is sold separately. • For details on how to connect the power cable to the monitor, refer to the monitor user manual. 3 Using the "Zero Client" (TB-CH) 44 Using the "Zero Client" (TB-CH) 3.3 Using the "Zero Client" 3.3.1 Login Welcome Log On to access your desktop. Username: (g) Password: Domain: Log On • Username : Enter the user name that will be used to connect to the "Citrix" server. • Password : Enter the password that will be used to connect to the "Citrix" server. • Domain : Enter the domain that will be used to connect to the "Citrix" server. K3 Ensure Broker Server is enabled under Network. 3.3.2 Message Box MagicRMS When the MagicRMS server is on, messages received from the server are displayed on the screen. Message The Identity function of MagicRMS allows you to check the host name of th...
Эта инструкция также подходит к моделям:Мониторы - TB-CH (3.3 mb)