Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
• 4:3: Sets the picture to basic (4:3) mode. Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) which is not covered by the warranty. • Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. • Custom: Changes the resolution to suit the user's preferences. 1084 Screen Adjustment 4 4 Screen Adjustment • Original ratio: If the input source is PC, DVI, HDMI (PC connection), the video will display in the original aspect ratio. Available ports may differ depending on the model. (page 24) You can adjust and store settings for each external device you have connected to an input on the product. Picture Sizes available by Input Source Input Source Picture Size AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3, Custom Component (1080i, 1080p) 16:9, 4:3, Screen Fit, Custom HDMI (720p, 1080i, 1080p) 16:9, 4:3, Screen Fit, Smart View 1, Smart View 2, Custom PC, DVI (when a PC is connected) 16:9, 4:3, Original ratio 4.3.2 Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen fit or Custom. • To use the Position function after selecting Zoom1, Zoom2 or Wide Fit, follow these steps. 1 Press the button to select Position. 2 3 4 5 Press the [ Press the Press the [ Select ClosReset. ] button. or button to move the p] button. e by pressing the andicture up or down. buttons sequentially. To reset the picture position, press • To use the Position function after selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) or Custom, follow these steps. 1 Press the button to select Position. 2 Press the [ ] button. 3 Press the /// button to move the picture. 4 Press the [ ] button. 5 Select Close by pressing the and buttons sequentially. If you want to reset the picture to its original position, select Reset in the Position screen. The picture will be set to its default position. 1094 Screen Adjustment 4 4 Screen Adjustment 4.3.3 PC Screen Adjustment Available in PC mode only. Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the center of screen. Position: To adjust the PC’s screen position if it is not centered or does not fit the product screen. Press the or button to adjust the Vertical Position. Press the or button to adjust the Horizontal Position. Image Reset: Resets the image to the default settings. 4.3.4 Resolution Select If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu. Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768 The Resolution Select option is only enabled when the input source is PC. 4.4 Auto Adjustment O MENU [m] Picture Auto Adjustment ENTER [ ] Adjust frequency values/positions and fine tune the settings automatically. This option is available when the input source is PC. 1104 Screen Adjustment 4 4 Screen Adjustment 4.5 Advanced Settings O MENU [m] Picture Advanced Settings ENTER [ ] All Advanced Settings are available in the Standard and Movie modes. To use, select an option using the up and down arrow keys, and then press [ ]. Use the arrow keys to change the value or setting, and then press [ ]. In PC mode, you can only make changes to Gamma and White Balance. Advanced Settings Black Tone Dynamic Contrast Shadow Detail Gamma Expert Pattern RGB Only Mode Color Space Off Off 0 0 Off Off Native The displayed image may differ depending on the model. 4.5.1 Black Tone Select the black level to adjust the screen depth. • Off / Dark / Darker / Darkest 4.5.2 Dynamic Contrast Adjust the screen contrast. • Off / Low / Medium / High 4.5.3 Shadow Detail Increase the brightness of dark images. 4.5.4 Gamma Adjust the primary color intensity. 1114 Screen Adjustment 4 4 Screen Adjustment 4.5.5 Expert Pattern Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibration and the Expert Pattern screen disappears. • Off Turns the Expert Pattern function off. • Pattern1 This test screen demonstrates the effect of the display settings on shades of grey and black. • Pattern2 This test screen demonstrates the effect of the display settings on colors. • After selecting Pattern1 or Pattern2, you can adjust any of the advanced settings for desired effect. • While the Expert Pattern is running, sound is not outputted. • Only enabled on Component, HDMI modes. 4.5.6 RGB Only Mode Displays the Red, Green and Blue color for making fine adjust...