Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Time MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > ENTER > [Timer] > > > > ENTER > [Time] > , > ENTER Within the set period of time specify a time for execution. • Mode-Scroll : 1~5 sec • Mode-Bar, Eraser : 10~50 sec • Mode-All White, Pattern : 1, 5, 10, 20 30 min Scroll Adjusting the PDP Display MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > > ENTER > [Scroll] This function prevents after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. Bar MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > > >ENTER > [Bar] This function prevents after-images on the screen by moving long black and white vertical lines. Eraser MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > > > >ENTER > [Eraser] This function prevents after-images on the screen by moving a rectangular pattern. All White MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > > > > >ENTER > [All White] Adjusting the PDP Display This function prevents after-images on the screen by changing the color of pixels to white. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. Pattern MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > > > > > >ENTER > [Pattern] This function prevents after-images on the screen by moving a diagonal pattern stored in the panel repeatedly. Resolution Select MENU > >>> ENTER > [Setup] >>>> > > > > >ENTER > [Resolution Select ] > , > ENTER When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note Available in PC mode only 1. Off 2. 1024 X 768 Adjusting the PDP Display 3. 1280 X 768 4. 1360 x 768 5. 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz. Power On Adjustment MENU > >>> ENTER > [Setup] >>>> > > > > >> ENTER > [Power On Adjustment ] > , > ENTER Adjusts the Power On time for the screen. Caution: Set the Power On time to be longer to avoid overvoltage. Side Gray MENU > >>> ENTER > [Setup] >>>> > > > > >> > ENTER > [Side Gray] > , > ENTER Select the brightness of the grey for the screen background. 1. Off 2. Light 3. Dark Reset Reverts the product settings to factory defaults. The Reset function is only available when PC / DVI is being used. Adjusting the PDP Display MENU > >>> ENTER > [Setup] >>>> > > > > >> > > ENTER > [Reset ] Image Reset MENU > >>> ENTER > [Setup] >>>> > > > > >> > > ENTER > [Reset ]> ENTER > [Image Reset ] > , > ENTER Note Available in PC mode only Note The Reset function is not available when Video Wall is On. Color Reset MENU > >>> ENTER > [Setup] >>>> > > > > >> > > ENTER > [Reset ]>> ENTER > [Color Reset ] > , > ENTER OSD Rotation MENU > > > > ENTER > > > > > > > > > > > > > > > ENTER > [OSD Rotation ] > , > ENTER OSD Rotate 1. Landscape 2. Portrait Multi Control Available Modes • PC / DVI / BNC • AV • HDMI • Component Adjusting the PDP Display Multi Control Assigns an individual ID to the SET. MENU > >>> > ENTER > [Multi Control ] > ENTER > , > [0~9] • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated. Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the PDP Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the PDP Display. The figure shown below ("Check Signal Cable") appears on a black background when the PDP Display is working normally even though no video signal is detected: While in the Self-Test mode, the LED power indicator remains green and the figure moves around on the screen. 4. Turn off your PDP Display and reconnect the video cable; then turn on both your computer and the PDP Display If your PDP Display screen remains blank after using the previous procedure, check your video controller and computer system; your PDP Display is functioning properly. Warning Messages You can even view the screen at a resolution of 1360(1920) x 768(1080). However, you will receive the following message for a minute; You can choose to change the screen resolution or stay in the current mode during that time. And if the resolution is more than 85Hz, you will see the black screen because the PDP Dis...
Эта инструкция также подходит к моделям:Мониторы - P50FP (2.64 mb)
Мониторы - P50HP (2.64 mb)