Оценок - 4, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Execute X-Window after setting other requested hardware. MDC Program Installation/Uninstallation Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window Is not displayed on the main screen, Install with the "MDC Unified" execution file in the MDC folder on the CD. 3 Click "Next" in the displayed Installation Wizard screen. 4 In the "License Agreement" window displayed, select "I accept the terms in the license agreement" and click "Next". 5 In the displayed "Customer Information" window, fill out all the information fields and click "Next". 6 In the displayed "Destination Folder" window, select the directory path you want to install the program in and click "Next". If the directory path is not specified, the program will be installed In the default directory path. 7 In the displayed "Ready to Install the Program" window, check the directory path to install the program in and click "Install". 8 Installation progress will be displayed. 9 Click "Finish" in the displayed "InstallShield Wizard Complete" window. Select "Launch MDC Unified" and click "Finish" to run the MDC program Immediately. 10 The MDC Unified shortcut icon will be created on the desktop after installation. JjjjT] • The MDC execution Icon may not be displayed depending on the PC system or product specifications. • Press F5 if the execution icon is not displayed. Uninstallation 1 Select Settings > Control Panel on the Start menu and double-click Add/Delete Program. 2 Select MDC Unified from the list and click Change/Remove. ŒA MDC Installation can be affected by the graphics card, mother board and network conditions. MDC System Multiple Display Control What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. Server PC RS232C OUT RS232C IN A A RS232C IN RS232C OUT m 80 ii il 1 11 1 1 { \ f N *f^* r \ * n ••••••••• i/ * CP V ™ J © l_¥ J RS232C IN m Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Server PC m RS232C OUT RJ 45 MDC RJ 45 MDC f H \ \ J RS232C IN RS232C OUT RS232C IN ♦ tt •••••••■• if* \ V J □ m Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. All the LFDs detected in a connection are displayed in the Device list, where the user can make groups and send commands to detected devices. Connection list modification options - Connection modification options includes Add, Edit, Delete, and Refresh. Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy-chain running from 1 to 99, and then finally to Set ID 0. Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window. Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1. Getting Started with MDC 1 To start the program, click Start —► Programs —> Samsung —> MDC Unified. 2 Click Add to add a display device. • If the connection is established via RS232C, go to Serial and specify the COM Port. If the connection is established via Ethernet, enter the IP that was entered for the display device. Add Connection Serial Ethernet I !P Address I 107 . ICS . 12 . 5 I Port Number 1515 I SET !D Range 00 i * 10 C Main Screen Layout Multiple Display Control “ System Tool 6 & O Menu Bar Change the status of a display device or the properties of the program. Device Category View a list of connected display devices or device groups. ^ Schedule Category View a list of schedules for display devices. i Set List Select the display device you want to adjust. Modify the Set List Add, edit, regroup or delete sets. 0 Help Topics Display help topics for the program. Menus You can power on or off a selected device or change the input source or...
Эта инструкция также подходит к моделям:Мониторы - 460UT-2 (4 mb)
Мониторы - 460UT-B (4 mb)
Мониторы - 460UTN-B (4 mb)
Мониторы - 460UTN2-UD2 (4 mb)