Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
(Available in PC, BNC mode only) 1. Red 2. Green 3. Blue Note If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom mode. MENU > , > ENTER > , > ENTER > ENTER > , > ENTER Color Temp Adjusting the LCD Display Color Temp is a measure of the 'warmth' of the image colors. Note This function is only enabled if the Color Tone is set to Off. MENU > , > ENTER > , > ENTER > , > ENTER Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. (Available in PC, BNC mode only) Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. MENU > , > ENTER > , > ENTER > ENTER > , > ENTER Adjusting the LCD Display Fine Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). MENU > , > ENTER > , > ENTER > , > ENTER > , > ENTER Position Adjusts the screen location horizontally and vertically. MENU > , > ENTER > , > ENTER > , > ENTER > , / , > ENTER Adjusting the LCD Display Auto Adjustment The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. (Available in PC, BNC mode only) Note The direct button on the remote control is the 'AUTO' button. MENU > , > ENTER > , > ENTER Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. (Available in PC, BNC mode only) Signal Balance Selects either On or Off with the signal control. Adjusting the LCD Display MENU > , > ENTER > , > ENTER > ENTER > , > ENTER Signal Control Adjusts the Gain and Sharpness manually. MENU > , > ENTER > , > ENTER > , > ENTER > ENTER > , > ENTER > , > , > ENTER Size The Size can be switched. 1. 16:9 2. 4:3 MENU > , > ENTER > , > ENTER > , > ENTER Adjusting the LCD Display PIP Picture Adjusts the PIP Screen Settings. Note Available Modes: PIP ON 1. Contrast Adjusts the Contrast of the PIP window on the screen. 2. Brightness Adjusts the Brightness of the PIP window on the screen. 3. Sharpness Adjusts the difference between the lightest and darkest areas of the PIP window. 4. Color Adjusts the Color of the PIP window on the screen. 5. Tint Adds a natural tone to the PIP window. Note You can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI mode. Operates only if the video signal is NTSC. MENU > , > ENTER > , > ENTER > , > ENTER > , > ENTER Picture [ AV / S-Video / Component / HDMI Mode] Available Modes • PC / BNC / DVI Adjusting the LCD Display • AV • S-Video • Component • HDMI Mode The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. Dynamic, Standard, Movie, or Custom can be activated. 1. Dynamic 2. Standard 3. Movie 4. Custom Note The direct button on the remote control is the 'P.MODE' button. MENU > , > ENTER > ENTER > , > ENTER Adjusting the LCD Display Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. 1. Contrast Adds a natural tone to the PIP window. 2. Brightness Adjusts the Brightness. 3. Sharpness Adjusts the picture Sharpness. 4. Color Adjusts the picture Color. 5. Tint Adds a natural tone to the display. Note Operates only for AV and S-Video mode. Operates only if the video signal is NTSC. MENU > , > ENTER > , > ENTER > ENTER > , > , > ENTER Adjusting the LCD Display Color Tone The color tones can be changed. The individual Color components are also user adjustable. 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to Cool1, Cool2, Normal, Warm1, or Warm2, the Color Temp function is disabled. MENU > , > ENTER > , > ENTER > , > ENTER Color Temp Adjusting the LCD Display Color temp is a measure of the 'warmth' of the image colors. Note This function is only enabled if the Color Tone is set to Off. MENU > , > ENTER > , > ENTER > , > ENTER Size The Size can be switched. 1. 16:9 2. Zoom 1 3. Zoom 2 4. 4:3 Note The Zoom1, Zoom2 are not available in 1080i (or over 720p) of Component and HDMI. MENU > , > ENTER > , > ENTER > , > ENTER Adjusting the LCD Display Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast. 1. Off 2. On MENU > , > ENTER > , > ENTER > , > ENTER Digital NR (Digital Noise Reduction) Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On MENU > , > ENTER > , > ENTER > , > ENTER Adjusting the LCD Display Film Mode Turns Film Mode Off/On. The Film Mode feature offers you a theater-quality viewing experience. (Not availab...
Эта инструкция также подходит к моделям:Мониторы - 400UX-M (6.12 mb)
Мониторы - 460UX (6.12 mb)
Мониторы - 460UX-M (6.12 mb)