Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Insert the CI CARD into the CAM in the direction of the arrow until it fits. 32 Connections 2. Insert the CAM with the CI CARD installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.) 3. Check if you can see a picture on a scrambled signal channel. Connecting AV Devices Connect the Video and Audio [R-AUDIO-L] port of the DVD, VCR or DTV Set-Top Box to the Video and Audio [R-AUDIO-L] lCd Display. Play the DVD, VCR or Camcorder with a DVD disc or tape inserted. Select AV using the SOURCE button on the front of the LCD display or on the remote. Connecting using a Component Cable 1. Connect the Component to D-sub cable(sold separately) to the product's RGB/ COMPONENT IN port and the COMPONENT - PR, Y, PB ports on the Set-Top Box. 2. Connect a set of audio cables between the AV/COMPONENT AUDIO IN [R-AUDIO-L] on the LCD Display and the AUDIO OUT jacks on the Set Top Box. I Note • Select Component using the SOURCE button on the front of the LCD Display or on the remote control. • Then, start the DVD Player with a DVD disc inserted. • A component cable is optional. 1. 2. 3. 33 Connections • For an explanation of Component video, consult your DVD or external device's user manual. Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [R-AUDIO-L] on the LCD Display . 2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display . 3. Select AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on the remote control. 4. Then, start the Camcorder with a tape inserted. c" I Note The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting Using a HDMI Cable 1. Connect input devices such as a Blu-Ray/DVD player to the HDMI IN terminal of the LCD Display using an HDMI cable. I Note • In HDMI mode, only PCM format audio is supported. 34 Connections Connecting Using a DVI to HDMI Cable 1. Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the LCD Display using a DVI to HDMI cable. 2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the DVI / RGB AUDIO IN terminal of the LCD Display. Connecting Using a DVI Cable Connect between the DVI OUT port on the LCD monitor and the input port on another monitor using a DVI cable. Connect between the AUDIO OUT port on the LCD monitor and the audio input port on another monitor using a stereo cable. Select DVI using the SOURCE button on the front of the LCD Display or on the remote control. Note DVI-OUT does not support HDCP. 35 Connections Connecting a DTV Set Top (Cable/Satellite) Box 1. Connect the Component to D-sub cable(sold separately) to the product's RGB/ COMPONENT IN port and the COMPONENT - PR, Y, PB ports on the Set-Top Box. 2. Connect a set of audio cables between the AV/COMPONENT AUDIO IN [R-AUDIO-L] on the LCD Display and the AUDIO OUT jacks on the Set Top Box. Note • Select Component using the SOURCE button on the front of the LCD Display or on the remote control. • For an explanation of Component video, see your Set Top Box owner's manual. Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and AUDIO OUT on LCD Display. Connecting a LAN Cable (S Note AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display. The LCD Display 's configuration at the back may vary slightly depending on the LCD Display model. 36 Connections Connect the LAN cable. (CXN-2 model only) Connecting a USB device • You can connect USB devices such as a mouse or keyboard. (CXN-2 model only) 37 Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click "Windows". 3. Choose your monitor model in the model list, then click the "OK" button. 4. If you can see following message window, then click the ...
Эта инструкция также подходит к моделям:Мониторы - 400CX-2 (8.61 mb)
Мониторы - 460CX-2 (8.61 mb)
Мониторы - 460CXN-2 (8.61 mb)