Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Press the [H key on the front operation area to enter the User color adjustment screen. User : It is possible to adjust the whiteness of the image to suit personal preference. 1) Select R (red), G (green), B (blue) with theUI key. 2) Adjust the color to match personal preference with 3 and E keys. * As user colors cannot be recalled, take note of the set values beforehand. <0 Recall: It is possible to return to the initial settings (the settings at the time of factory shipment). 1) When the [D key (Yes) is pressed, the settings are recalled and the menu screen returns. (Recall = return to initial settings (settings at time of factory shipment)) 2) When the [H key (No) is pressed, the menu screen returns without the settings being recalled. (The settings return to what they were immediately before the recall.) If there are no operations performed for about 30 seconds, the screen goes off without a recall. Video Level ! The video input signal level can be matched to the computer being used. Either 0.7 V or 1.0 V can be selected with the [U (0.7 V /1 V) key. Use 0.7 V under normal condition. Moire reduction ! Moire patterns are caused by interference of the CRT dot pitch and video signal due to the resolution of the input signal, video pattern, etc., producing patterns of horizontal stripes (Horizontal moire pattern) or vertical stripes (Vertical moire pattern). Caution: If the moire reduction is overcorrected, the picture quality (for example focus, vertical line stability, etc.) will sometimes be affected. Keep this adjustment within the range in which the picture quality is not affected. H. Moire I The moire correction circuit can be switched On and Off with the [D key. When the moire correction circuit is switched On with the Hj (On / Off) key, the adjustment screen menu appears. Adjust with the 3 and B keys so that the striped moire pattern is in its optimum condition. ^ V. Moire : The moire correction circuit can be switched On and Off with the d) key. When the moire correction circuit is switched On with the {2} (On / Off) key, the adjustment screen menu appears. Adjust with the 3 and B keys so that the striped moire pattern is in its optimum condition. 11 ENG ENGLISH Adjustments (Continued) Adjustments menu Convergence I Convergence is affected by geomagnetism. Use this function when convergence error occurs after moving the monitor or changing the screen angle. These convergence adjustments should be made after monitor operation has stabilized. o |HIH| H.Convergence I Horizontal convergence of the image (color fringing) can be adjusted. Press [H key to toggle between H.Convergence and V.Convergence. Note: If the 3 and E keys are pressed at the same time on the H.Convergence adjustment screen, the standard level (50) will be set. Press the E key to move red to the right and blue to the left. Press the 3 key to move red to the left and blue to the right. [^1 V.Convergence: Vertical convergence of the image (color fringing) can be adjusted. Press [D key to toggle between V.Convergence and H.Convergence. Note: If the 3 and E keys are pressed at the same time on the V.Convergence adjustment screen, the standard level (50) will be set. Press the E key to move red downwards and blue upwards. Press the 3 key to move red upwards and blue downwards. 1=1 Llnearity-C ! The image can be adjusted for vertical linearity in the center. Press [H key to toggle between Linearity-C and Linearity-E. Note: If the 3 and E keys are pressed at the same time on the Linearity-C adjustment screen, the standard level will be set. Press the B key to make the center linearity narrower. Press the 3 key to make the center linearity wider. [=1 Linearity-E : The image can be adjusted for vertical linearity in the edge. Press {2} key to toggle between Linearity-E and Linearity-C. Note: If the 9 and E keys are pressed at the same time on the Linearity-E adjustment screen, the standard level will be set. Press the fi key to make the bottom linearity wider. Press the 3 key to make the top linearity wider. ?