Оценок - 2, средний балл: 3.5 ( )

Производитель: Panasonic Размер: 1.57 mb Название файла: CFVDW07.PDF Язык инструкции:

(The wireless display will be unable to keep up with the processing speed and the picture data will differ from the expected output.) 1 Turn on your computer (Q3 Operating Instructions of the computer) 2 After confirming the display status indicator has lit, turn on the wireless display After confirming the harddisk indicator has lit and about 10 seconds or more have elapsed, turn on the wireless display Press the power switch and hold it for approximately one second until the power indicator turns on before releasing it. 3 Select your application Power Indicator ® ifr Power Switch (!) Shutting Down 2 3 Display the shut down screen Alter saving important data and closing each application, select [Shut Down] from the [Start] menu. Confirm shut down Select [OK] after selecting [Shut down]. When [Windows is shutting down] is displayed, select [OK] Your computer and the wireless display will power off automatically. Xnote> After shutting down by pressing the power switch for more than four seconds, “PC in standby” w ill be displayed though the computer is not in standby mode. In this case, select [OK], The wireless display will power off automatically. 17 Touchscreen The wireless display is equipped with a touchscreen function allowing you to perform the same operations as the mouse by touching the surface of the display with the stylus. Moving the cursor Cursor Double-clicking # Clicking Dragging The double-clicking speed can be set by selecting [Start] - [Settings] - [Control Panel] -[Mouse] - [Buttons] - [Double click speed]. Right-Clicking (T) Press R-button. © R-Button 18 rSH)' \ The touchscreen f\inction can not be used in the MS-DOS mode and when using the full screen in [MS-DOS prompt]. rHandling-the-Touchscreen~j • Use the stylus included with the wireless display. Do not use an implement other than the stylus that comes with the computer. • Do not place any object on the surface or press down forcefully w ith sharp-pointed objects (e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens). • Do not operate the computer when such things as dust are on the screen. Do not allow’ substances such as oil to contact the LCD. The cursor may not work properly in such cases. • When the touchscreen becomes dirty: Wipe lightly to remove dirty areas by using a dry soft cloth (included). Do not use benzene or thinner, or disinfectant-type alcohol. (For more information, refer to “Suggestions About Cleaning the LCD Surface-” that comes with the soft cloth.) rHandling-the Stylus-j • Clean the stylus tip and screen prior to operation. Foreign particles can scratch the screen and impede the operation of the stylus. • Use the accessory stylus only on the wireless display screen. Using it for any other purpose may damage the stylus and scratch the screen. • Do not use pencils, implements with sharp tips or hard objects for screen operations. The screen may be damaged as a result. 19 Touchscreen [-Calibration-, Define the calibration setup when the cursor, the stylus (included) touches do not appear to agree. 1 2 3 Press Menu button Select [Option] Select [Calibration] Touch the five marks on the calibration screen. % Menu Button 20 Software Keyboard When selecting Ш Software Keyboard] on the taskbar or when the character input box of an application is selected, the software keyboard shown below automatically starts up, and characters can be input by using the software keyboard. We recommend leaving the software keyboard as an icon instead of closing the software keyboard w’hen it is not being used. The software keyboard will no longer start up automatically if [x] is selected to close the keyboard. In this case, it can be restarted by selecting [Start] - [Programs] - [Panasonic] - [Software Keyboard], The system menus is displayed. (q= page 22) The software keyboard will be moved to the four comers of the screen. ESC 1 FI F? FJ 1 f* 1 П "I FB 1 F7 1 « 1 F* 1 FIB ¡ F1J п* 1ИШСОГХ11 ? 3 4 5 7 e I 9 j o ■14 “ 1 Tab Q - r t у - i • r [ \ \ Cipo Lock • » d Í h 1 к i Eater 1 SMII * - m / 5ЫЙ Ctrl W1 All A« Del Up I Un < jo R 1 Use as a short cut key. The action is the same as a right mouse button click. (The same function as the ^ key.) 21 Software Keyboard Tf you want to press short cut key, after pressing one key, press the sccond key in a continuous manner. For example, if you want to type fctrD+fcl , after pressing C Ctrl ), press CC) . If an external keyboard is connected to the computer, all operations on the external keyboard are not reflected on the software keyboard. C Ctrl)+ C Alt) + C Del ) cannot be input through the software keyboard. (Except when logging on). 4Windôwsi981 When pressing ( Ctrl )+C Alt)+( Del )with the external keyboa...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: