Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Touching Video on the SETUP MENU will open the screen shown below. From here you can enter the setup screens for both Video 1 and Video 2 by touching their respective buttons. VIDEO SETUP Refer to the following table for additional VIDEO SETUP menu details. Video Setup Details VIDEO SETUP SCREEN CONTROL DESCRIPTION QM Audio 1 Detects the presence of QM Audio on channel 1. QM Audio 2 Detects the presence of QM Audio on channel 2. Setup Video 1 Displays the VIDEO 1 SETUP menu. By default, the VIDEO 1 SETUP menu displays video controls: Brightness, Contrast, Saturation and Hue on the right side of the menu. Video Pressing this before pressing the Setup Video 1 button will open the VIDEO 1 SETUP menu in Video mode. (Continued on following page) Video Setup Details (Continued) VIDEO SETUP SCREEN CONTROL DESCRIPTION Setup Video 1 (Continued) S-Video Pressing this before pressing the Setup Video 1 button will open the VIDEO 1 SETUP menu in S-Video mode. Component Pressing this before pressing the Setup Video 1 button will open the VIDEO 1 SETUP menu in Component mode. RGB Pressing this before pressing the Setup Video 1 button will open the VIDEO 1 SETUP menu in RGB mode. Setup Video 2 Displays the VIDEO 2 SETUP menu. By default, the VIDEO 2 SETUP menu displays video controls: Brightness, Contrast, Saturation and Hue on the right side of the menu. Video Pressing this before pressing the Setup Video 2 button will open the VIDEO 2 SETUP menu in Video mode. S-Video Pressing this before pressing the Setup Video 2 button will open the VIDEO 2 SETUP menu in S-Video mode. Component Pressing this before pressing the Setup Video 2 button will open the VIDEO 2 SETUP menu in Component mode. RGB Pressing this before pressing the Setup Video 2 button will open the VIDEO 2 SETUP menu in RGB mode. The following screen is displayed when Video, S-Video or Component are selected. VIDEO 1 SETUP (Video, S-Video and Component) The video menu for RGB controls consists of size and position (shown) and color controls for Brightness, Contrast, Saturation and Hue when RGB Color is touched. VIDEO 1 SETUP (RGB Size & Position shown) Refer to the following table for additional VIDEO 1 SETUP details. Video 1 Setup Details – Video, S-Video, Component and RGB VIDEO 1 SETUP SCREEN CONTROLS DESCRIPTION QM Signal Indicates the presence of a QM signal. Video Preset Displays the current Video Preset number. Saved presets can also be called up using this control. The – and + buttons decrement and increment the displayed value. Load Preset Will load the selected Video Preset. Store Preset Will store any changes you have made to the video setup at the displayed preset number. Restore Default Color Settings Returns the video settings to their factory defaults. Color Control When Video, S-Video or Component is selected as the video type, these controls are available. The Restore Default Color Settings button places the controls at their midpoint. Brightness1, 2 Adjusts video image brightness with the – and + buttons. Contrast1, 2 Adjusts video image contrast with the – and + buttons. Saturation3 Adjusts video image saturation with the – and + buttons. Hue3 Adjusts video image hue with the – and + buttons. Red1, 2 Adjusts the amount of red in the video signal. Available when the RGB Color button is selected. Green1, 2 Adjusts the amount of green in the video signal. Available when the RGB Color button is selected. (Continued on following page) Video 1 Setup Details – Video, S-Video, Component and RGB (Continued) VIDEO 1 SETUP SCREEN CONTROLS DESCRIPTION Color Control (Continued) Blue1, 2 Adjusts the amount of blue in the video signal. Available when the RGB Color button is selected. Overscan3 These controls adjust the amount of video information at the edges of the image. This part of the video picture is usually beyond the display capabilities of the screen. None3 Sets the video screen so there is no overscan. The amount of used screen area is smallest in this configuration. Normal3 Sets the video screen for normal overscan. This results in more area of the screen being used. Max3 This sets the video screen area to the maximum. The screen area is largest in this configuration. All video information at the edges is visible. Size and Position When RGB is selected as the video source, these controls are available when the RGB Size and Position button has been pressed. Calibration Calibrates the incoming RGB signal for optimal position, size and phase when Perform Calibration button is pressed. In Auto Mode, the panel will attempt to find a matching preset based on the RGB signal’s characteristics. If it cannot find one, it automatically performs a calibration. In Manual Mode, the panel will not attempt to find a matching preset nor will it automatically perform a calibration. In either mode, you can always adjust the settings (Position, Size, Phase Coarse, Phase Fine) manually. Settings are not saved to a preset unless the user presses the Store Preset button...
Эта инструкция также подходит к моделям:Мониторы - Isys G-Series TPS-12G-QM (8.34 mb)