Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
e the unit to fall and break) A When installing, be sure to have at least two people handling the unit. A When attaching stand to plasma display, be sure to cover the surface to protect from (It may result in unwanted marks on the units, if working without the protective covering) S T A N D 2 3. ASSEMBLING INSTRUCTIONS 1 1 HOW TO DISPOSE OF THE PLASMA MONITOR WRAPPER ■ First dispose of the wrapping band and raise the top box to open. Afterwards, dispose of the Styrofoam and remove the vinyl covering. 2 HOW TO DISPOSE OF THE PROTECTIVE CAP. Place a protective covering over the surface you will be working on and lay the plasma display as shown below. ■As shown below, unscrew the screws and take out both of the protective caps. 3 PLASMA DISPLAY STAND 3 3 ASSEMBLING THE PLASMA DISPLAY STAND Open and take out the stand from the box and remove wrapper. Slide the stand under the plasma display like the picture below. ■ Use the enclosed 2 M5 screws to secure the assembled stand. M5 Screws s (Picture of a properly installed stand "|" and display) N D 4 4. DISASSEMBLING INSTRUCTIONS DISASSEMBLING PLASMA DISPLAY STAND Place a protective covering over the surface you will be working on and lay the plasma display as shown below. Completely unscrew the secured 2 screws. Pull the stand away from the plasma display to disassemble. 5...
Эта инструкция также подходит к моделям:Мониторы - DP-ST20 (1.41 mb)