Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly the 0-9 buttons 2. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL MEMORY XX ERASE” is displayed on screen. To STORE a channel, press the button until the MANUAL MEMORY XX ADD is displayed on screen. TURNING THE VOH802 DL ON AND OFF 1 Sliding the screen release lock forward viewing will unlock the screen and it will drop down slightly. (Pivot the screen downward until a comfortable angle is reached). After the unit has been turned on and is displaying a picture, adjustment to the viewing angle can be made by pivoting the screen to optimize the picture quality. The internal friction detent will hold the screen in position while the system is in use. 2 Pressing the power button on the pod or remote alternately turn the system on or off. When in use the internal back lighting will illuminate 3 Remember to turn the unit off and screen to the locked position when -8- OPERATION OVERHEAD DOME LIGHTS A three-position slide switch controls the Dome Lights on the VOH802 DL. Sliding the switch to the ON position will turn the Dome Lights ON. The OFF position will prevent the Dome Lights from turning ON at all times and the auto position will allow the Dome Lights to turn ON and OFF with the vehicle’s interior lighting. Do not leave the vehicle unattended with the Dome Lights switch in the ON position, as this could result in a discharged battery. Dome Light Switch Dome Light Dome Light REMOTE INFERRED SENSOR/REPEATER The VOH802 DL incorporates a Remote Infrared Sensor, which relays the signals from the Remote Control to allow the VOH802 DL and VCP to be controlled simply by pointing it’s Remote Control at the remote sensor. This provides control of auxiliary equipment such as an Audiovox VCP or DVD Player. The Remote Infrared Sensor can relay signals from most manufacturers Remote Control to its respective component connected to the Video 1 and 2 inputs. In this case you must use the Remote Control supplied with the other manufacturers component. Remote Inferred Sensor -9- OPTIONAL ACCESSORIES WIRELESS HEADPHONES The VOH802 DL includes a built in Infrared Transmitter for use with Audiovox Wireless Headphones (P/N MVIRHS). Turning the Headphone switch ON activates will activate the internal IR Receiver, the volume can then be adjusted separately with the controls on each headset. Any number of wireless headphones can be used, but all must be within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. The VOH802 DL has a Jack labeled “to FM Transmitter”, this Jack is for connection of an optional Audiovox RF Transmitter (P/N WTXRF01). This Transmitter is for use with the Audiovox Wireless Headphones (P/N WHPRF01). Consult the documentation accompanying the Audiovox Wireless Headphones AUXILIARY A/V STEREO INPUTS JACK The VOH802 DL may be equipped with an auxiliary A/V stereo input connector (optional). These inputs are provided to facilitate the temporary connection of optional audio/video equipment, such as a camcorder or video game system. To play a source with these inputs, an RCA patch cord is required to connect the audio/video signals to their respective jacks. Mono audio sources will require the use of an RCA Y-cable (P/N 0892165) to connect to both right and left inputs, if patch cords are installed into the AUX inputs, the VIDEO INPUT 2 will be temporarily bypassed. Once the connections have been made, turn the VOH802 DL on and press the source button on the VOH802 DL or the TV/Video button on the remote control until “Video 2” is displayed on the screen. The unit will now play the audio and video signals from the accessory connected. The remote control will not operate the accessory components. VOH802DL Jack Panel HEADPHONES AUDIO R AUDIO L VIDEO HEADPHONES -10 WIRED FM MODULATOR (P/N FMM100) Your video system may be equipped with an optional RF modulator, that allows you to listen to the VOH802 DL’s audio signal by tuning your vehicle’s radio to the selected frequency, (88.7 or 89.1- check with your installer) and tuning on the remote mounted RF modulator switch. (In most cases this toggle switch will be located underneath the driver’s side of the dash, check with your installer for the exact location.) Whenever the RF Modulator is ON, broadcast radio reception will be poor. Turning the remote mounted toggle switch OFF will allow for normal radio reception. VIDEO OUTPUT The VOH802 DL provides a video output for an optional Video monitor(s). This output will provide video signal that duplicates the signal displayed the VOH802 DL to an additional Monitor display. Please see your installer for more information. -11- TYPICAL SYSTEM CONNECTIONS 15 16 17 13 14 1 2 TOFMTRANSMITTERSPEAKERORHEADPHONECONNECTIONCONNECTIONPOWER(GND) 3 4 5 6 12 10 7 8 9 LINEOUT-RLINEOUT-VLINEOUT-LTWODOMELIGHT’SPOWER(+12V) White RCA(Audio Left) Red RCA( Audio R...
Эта инструкция также подходит к моделям:Мониторы - VOH802 (248.04 kb)