Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
3. (B) To tune weak or marginal channels with the CHANNEL UP/DOWN buttons , press the SKIP/ SEARCH button on the Remote Control Unit until “SKIP MODE OFF” is displayed on the bottom of the screen. Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly to the channel by using the 0-9 buttons on the Remote Control. -9 128-6117 9 of 16 4. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL MEMORY XX ERASE” is displayed on screen. To STORE a channel, press the button until the MANUAL MEMORY XX ADD is displayed on screen. Note : Please refer to page 2 for more information on TV reception. FM Radio Operation 1. If using wired headphones, insert the headphone set plug into the headphone jack on the right side of the LCD pod labelled RADIO EAR. If using a wireless headset, switch the Channel A/B switch to channel B for the FM radio. Channel A is used for the video audio. 2. Press the Radio power on button. The LCD window will display the FM station frequency and memory channel number. 3. Press the tuning UP or DOWN button to select the desired radio station. 4. If the radio station is broadcasting in stereo, then LCD window will display STEREO. 5. Press the Memory button and select the preset number you wish to assign. The number can be selected from 1 to 6 sequentially. The selected number will flash. Press and hold the memory button until the display stops flashing. The preset then be displayed continuously. 6. Pressing the Recall button will scroll through the six presets. 7. Pressing the Volume UP or DOWN button in the remote control unit will set the desired volume level in the headphones. 8. Press the Mute button on the remote control unit to mute the sound in headphone and press Mute button again, to restore the sound to the original level. Turning the VOH704 On or Off 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The internal friction detent will hold the screen in position while the system is in use. 2. Pressing the power button on the pod or the remote will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture quality. 4. Remember to turn the unit off and pivot the LCD to the locked position when not in use. -10 128-6117 10 of 16 Operation Overhead Dome Lights The lights integrated into the VOH704 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times and the auto position will allow the lights to turn on and off with the vehicle’s interior lighting. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery. Dome Light Switch Remote Sensor The VOH704 incorporates an Infrared sensor which relays signals from the remote control to allow the VOH704 and VCP to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can relay signals from any manufacturer’s remote controls to the component connected to the Video 1 and 2 inputs, such as a DVD player. In this case you must use the remote control supplied with the DVD player. Infared Transmitters Remote Sensor Eye Remote Sensor Eye -11 128-6117 11 of 16 Accessories Wireless Headphones The VOH704 includes a built-in infrared transmitter and Audiovox wireless headphones (Part Number IR2CHS-(Two Channel). The volume can be adjusted with the control on each headset. The wireless headphones must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. Headset Special Features -Dual Channel. -Automatic Level Control prevents input signal over loading. -Uses high frequency infrared light to assure a clean signal for clear reception. Controls and Indicators (Fig.1) 1. INFRARED PICKUP SENSORS – (Receives signals from transmitter) 2. BATTERY COVER 3. VOLUME CONTROL 4. POWER SWITCH 5. POWER INDICATOR LED 6. CHANNEL A/B SWITCH 7. AUTO ON/OFF MICRO SWITCH Fig. 1 1 2 5 3 R 4 6 Auto ON/OFF Micro Switch is activated when headphones are placed on head (shown below) 7 -12 128-6117 12 of 16 Battery Installation (Fig.2) 1. Place two alkaline AAA batteries in the Headphone’s battery compartment making sure that the battery polarity is correct. 2. Replace the battery cover. Fig. 2 HEADPHONE OPERATION IMPORTANT:To prevent possible ear damage, Read the following Carefully! 1. Turn the headphone volume down before turning on the power. Turn on the headphone power then increase the headphone volume to a comfortable level. ...
Эта инструкция также подходит к моделям:Мониторы - VOH704 (112.08 kb)