Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1. Important
• If foreign substance or water gets in
Service
your Display, please turn the power
• The casing cover should be opened
off immediately and disconnect
only by qualified service personnel.
the power cord. Then, remove the
foreign substance or water, and
• If there is any need for any
send it to the maintenance center.
document for repair or integration,
please contact with your local
• Do not store or use the Display in
service center. (please refer to the
locations exposed to heat, direct
chapter of “Consumer Information
sunlight or extreme cold.
Center”)
• In order to maintain the best
• For transportation information,
performance of your Display and use
please refer to “Technical
it for a longer lifetime, please use
Specifications”.
the Display in a location that falls
within the following temperature
• Do not leave your Display in a car/
and humidity ranges.
trunk under direct sun light.
• Temperature: 0-40°C 32-104°F
Note
• Humidity: 20-80% RH
Consult a service technician if the
Display does not operate normally, or
Important information for Burn-in/
you are not sure what procedure to take
Ghost image
when the operating instructions given in
• Always activate a moving screen
this manual have been followed.
saver program when you leave
your Display unattended. Always
activate a periodic screen refresh
1.2 Notational Descriptions
application if your Display will
The following subsections describe
display unchanging static content.
notational conventions used in this
Uninterrupted display of still or
document.
static images over an extended
period may cause “burn in”, also
Notes, Cautions and Warnings
known as “after-imaging” or “ghost
Throughout this guide, blocks of text
imaging”, on your screen.
may be accompanied by an icon and
• “Burn-in”, “after-imaging”, or
printed in bold or italic type. These
“ghost imaging” is a well-known
blocks contain notes, cautions or
phenomenon in LCD panel
warnings. They are used as follows:
technology. In most cases, the
“burned in” or “after-imaging” or
Note
“ghost imaging” will disappear
This icon indicates important
gradually over a period of time after
information and tips that help you make
the power has been switched off.
better use of your computer system.
Warning
Caution
Failure to activate a screen saver, or
This icon indicates information that
a periodic screen refresh application
tells you how to avoid either potential
may result in severe “burn-in” or “after-
damage to hardware or loss of data.
image” or “ghost image” symptoms
that will not disappear and cannot be
repaired. The damage mentioned above
is not covered under your warranty.
2
...