Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
for use when contacting the manufacturer: Model No. ______________ Purchase date ____________________ Serial No. ______________ Purchase place ____________________ For Information About This Product, call 1-800-330-0712 Model PW2515 Contents Page Getting ToKnow Your Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety and Warning Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Pre-Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 9 Maintenance and Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Service Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Replacement Parts Lists • Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 • Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Carefully read and understand these instructions before operating your pressure washer. REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. © 2006 Campbell Hausfeld/Scott Fetzer For parts, product & service information IN467900AV 8/06 visit Pressure Washer Getting To Know Your Pressure Washer 1 2 3 6 9 10 11 12 13 5 4 7 8 PW2515 1 Detergent Tank 9 Fuel Tank 2 Muffler 10 Choke 3 Location of Serial Number/Product Decal 11 Engine switch - On/Off 4 (Pump) Inlet Connection for Garden Hose 12 Fuel Valve - On/Off 5 Lance with Quick Connect 13 (Pump) Outlet Connection for High Pressure 6 Tip Holder with Spray Tips Hose 7 Handle 8 Gun with trigger 2 Pressure Washer Frequently Asked Questions How do I start my pressure washer? 1. Make sure you have gas and oil in the engine. The engine DOES NOT COME FILLED WITH OIL. 2. Turn the water on, then trigger the gun to make sure the water will flow smoothly out of the tip. 3. Open the fuel shutoff valve by turning the knob counterclockwise until it stops. 4. Close the choke (if engine is cold) by moving the choke ring fully to the right. 5. Set the shut off switch to “ON.” 6. Pull the trigger (to relieve any back pressure in the pump) while pulling the starter cord. What type of oil do I use? ENGINE DOES NOT COME FILLED WITH OIL: See Page 10 for engine oil types, quantities, and oil changing instructions. Pump: The pump comes filled with the correct amount of oil and should not need changing or filling. Why don’t I have any water pressure? • Is the water hose attached to the pressure washer? • Is the water turned on? • Check for any kinks, leaks, or blockage in the hoses, fittings, or the nozzle. • Is the 15. (yellow) spray tip inserted into the end of the lance (See Page 8)? • Is the inlet filter screen free of debris? Check and remove debris if needed. How do I get high pressure? • For high pressure, insert the 15. (yellow) spray tip into the end of the lance (See Page 8). How do I get the soap suction to work? 1. Connect the clear plastic chemical suction tube to the plastic hose barb on detergent tank. 2. Fill the detergent tank with detergent forumlated for use with pressure washers. 3. To spray soap, insert the 65° (black) soap spray tip into the end of the lance (see page 8). Why doesn’t the pressure washer apply detergents with high pressure? Detergents “bounce” off cleaning surfaces as fast as they are applied. The pressure washer’s features allow for a detergent to be drawn while in low pressure mode only. By applying detergent at low pressure, the effect of “bouncing” is reduced. Also, detergents are only effective when time is allowed for them to work on the surface of whatever is being cleaned. After applying the detergent, wait 1-3 minutes while it works, and then proceed to rinse the surface with high pressure. What maintenance do I need to perform on my pressure washer? 1. After turning off the pressure washer and the water, depressurize the hose by triggering the gun. 2. Remove the garden hose and high pressure hose from the pump. 3. Pull the start rope slowly five times to purge water from the pump. This will help protect the pump from damage. 4. Do not store your pressure washer in an area where the temperature will drop below 32° F. 5. Follow proper storage and winterizing instructions found on page 9. What do I do if I’m missing a part? Call Campbell Hausfeld at 1-800-330-0712 and we will prom...