Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
FEATURES PRODUCT SPECIFICATIONS Fuel Tank Capacity......................................................................................................................................................0.96 gal Oil Capacity.................................................................................................................................................................20.3 oz. Maximum Pounds Per Square Inch Pressure*..........................................................................................................3,100 psi Maximum Gallons Per Minute*....................................................................................................................................2.5 gpm Maximum Inlet Water Temperature.................................................................................................................................104.F *Max. rating determined by PWMA Standard 101 KNOW YOUR PRESSURE WASHER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 5-IN-1 CHANGE OVER NOZZLE The 5-in-1 Change Over Nozzle makes it easy to change spray patterns. FUEL TANK This fuel tank has a maximum capacity of 0.96 gal. Use unleaded automotive gasoline in the engine. HONDA GCV190 ENGINE This Honda engine enables the pressure washer to achieve 3,100 psi (pounds per square inch) at a rate of 2.5 gpm (gallons per minute). Please read the engine manual included with this product. HOSE STORAGE Once the high pressure hose is rolled, hang it on the back of the machine using the stretch strap to secure in place. ON/OFF SWITCH The on/off switch is used in combination with the starter grip and rope to start the engine. It is also used to turn the engine off. STARTER GRIP AND ROPE The starter grip and rope is pulled to start the machine. SPARK ARRESTOR This engine is not factory equipped with a spark arrestor. In some areas it is illegal to operate an engine without a spark arrestor. A spark arrestor is available by calling customer service for assistance. THERMAL RELEASE VALVE This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water. Once the water has drained, the thermal relief valve will reset itself. TRIGGER HANDLE The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue. TRIGGER WITH LOCK OUT Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use. ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-242-4672 for assistance. PACKING LIST Pressure Washer 25 ft. High Pressure Hose Trigger Handle Holder Spray Wand Holder Phillips Screw [1/4-20 x 2.27 in.] (2) Phillips Screw (1/4-20 x 1.85 in.) Nuts (3) Trigger Handle Spray Wand 5-in-1 Change Over Nozzle Injection Hose plus Filter Washer 4-Cycle Engine Lubricant (SAE 30 or SAE 10W30) High Pressure Hose Storage Operator’s Manual TOOLS NEEDED See Figure 1a. The following tools (not included or drawn to scale) are needed for assembly: 7/16 in. combination wrench Phillips screwdriver WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts. RAISING AND LOWERING THE HANDLE See Figure 2. n To raise the handle: pull the handle up until the handle release knob snaps through the locking hole to secure the handle in place. n To lower the handle: pull the handle release knob out then lower ...