Many tasks which were previously difficult, can now be solved in a few minutes and with a much better result. If, contrary to expectations, problems should arise which cannot be remedied by means of the information in section 8.0, the Nilfisk service organization will be at your disposal. Nilfisk is a global concern with a comprehensive knowledge within development and manufac turing of ef ficient and environmentally friendly cleaning solutions. Our product range comprises cleaning solutions for selected customer groups - from machines for domestic use to big industrial cleaning systems. The expertise of Nilfisk is cleaning focusing the need of the customer. Our wish is that you as a customers should feel quite confident that the cleaning equipment you buy from us is the most efficient and that it fulfils all of your expectations. Best regards Nilfi sk Division of Nilfi sk-Advance A/S Fields of application EN Model survey (P 12 476) 1. Electric cable The applications for this product are domestic clean 2. Start-/stop switch ing jobs: 3. Connection for high pressure hose (only PRO 130/150/160) Car, motorbike, boat, caravan, trailer, pa tio/drive/ 4. Connection for water (with filter) flagstones, woodwork, brickwork, bar be cue, 5. High pressure hose garden furniture etc. 6. Spray gun with trigger (6a) and locking device (6b) 7. Spray lance with bayonet socket 8. TORNADO® PR nozzle 9. POWERSPEED® nozzle 10. Needle for cleaning of nozzle 11. Detachable container for detergents 12. Dosing regulator for detergents Contents EN 13. Pressure gauge (not available on model B) 14. Regulation of pressure / water volume (not available on model B) 1.0 Preparation .................................................... 4 15. Hose reel (only PRO 130/150/160 X-TRA) 2.0 Operating instructions ....................................5 16. Hose storage (only PRO 130/150/160) 3.0 Accessories ................................................... 7 4.0 Maintenance .................................................. 8 5.0 Storage .......................................................... 8 Specifi cations: See model tag of machine. 6.0 Recycling the washer ..................................... 8 7.0 Questions - and answers ............................... 8 Sound pressure level measured in accor dance with 8.0 Trouble shooting guide ...................................9 ISO 3744, EEC Directive 2000/14/EEC: 9.0 Warranty ..................................................... 10 P 130.1: LpA = 80 dB(A), LWA = 90 dB(A). P 150.1: LpA = 80 dB(A), LWA = 93 dB(A). P 160.1: LpA = 80 dB(A), LWA = 95 dB(A). Hand/arm vibrations measured according to ISO 5349 is < 2.5 m/s2. We reserve the right to alter the spec i fica tions. 1.0 Preparation EN Before starting up your high pressure wash er, we advise you to carefully read through this instruction manual. Fol low all instructions to min i mize the risk of injuries when using the ma chine. Prior to operation Before you start up your new machine for the first time, you must mount the holder for the spray lance. It is fixed at the top of the transport handle. 1 2 1. Insert the holder in the recess of the handle (see illu.). 2. Fix the holder with the screw. Mount water filter and water inlet connection (4). PRO 130/150/160 X-TRA: Mount the handle for the hose reel. Before starting up your machine please check it care ful ly for any de fects. If you find any, do not start up your ma chine and con tact your Nilfisk distributor. Especially check: • The insulation of the electric cable should be fault less and without any cracks. If the elec tric cable is damaged, it should be replaced by an authorized Nilfisk distributor. Mains power connection The following should be observed when connecting the high pressure washer to the elec tric in stal la tion: • Only connect the machine to an in stal la tion with earth connection. • The electric installation shall be made by a certi fi ed electrician. • It is strong ly rec om mend ed that the elec tric sup ply to this ma chine should in clude a re sid u al cur rent device (GFCI). Extension cable Extension cables should be of a watertight construc tion and comply with the below-men tioned requirements for length and cable dimensions. 1,5 mm. max 20 m 2,5 mm. max 30 m • Cable connections should be kept dry and off the ground. • Always uncoil the extension cable com plete ly to avoid heat dam age to the cable. Water connection Connect the high pressure washer by means of a water hose to the water tap (pressure of inlet wa ter, max. 10 bar - temperature of inlet water, max. 60°C).You may use an or di nary ." gar den hose of min. 10 m and max. 25 m. At tach the hose using a quick connector. NOTE: Connection to the public mains according to regulations. This high pressure washer is only allowed to be connected with the drinking water mains, when an appropriate backflow preventer has been installed, Type BA according to EN 1717. The backflow preventer can be ordered under number ...

Эта инструкция также подходит к моделям:
Моечное оборудование - P 150.1 (1.97 mb)