Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Craftsman, модель D26183-025-1

Производитель: Craftsman
Размер: 473.96 kb
Название файла: 5ad0aaf4-d9a0-45c8-b86e-2d9e54097ca2.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


* An air compressor that pumps air more than 50% during a one hour period is considered misuse because the air compressor is undersized for the required air demand. • Repair and transportation costs of merchandise determined not to be defective. • Costs associated with assembly, required oil, adjustments or other installation and start-up costs. • Expendable parts or accessories supplied with the product which are expected to become inoperative or unuseable after a reasonable period of use, including but not limited to sanding disks or pads, saw and shear blades, grinding stones, springs, chisels, nozzles, o-rings, air jets, washers and similar accessories. • Merchandise sold by Porter-Cable which has been manufactured by and identified as the product of another company, such as gasoline engines. The product manufacturer's warranty, if any, will apply. • ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF THE PRODUCT IS NOT COVERED BY THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. • IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Porter-Cable Corporation Jackson, TN USA 1-888-559-8550 D26183 18- ENG NOTES 19- ENG D26183 QUICK FACTS CALL 1-888-559-8550 TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU FOR REPAIRS AND SERVICE PART PURCHASES. GAS OIL WATER PRESSURE ADJUSTMENT PUMP BY-PASS MODE THERMAL RELIEF VALVE HOSE ENGINE SOAP/CHEMICALS NOZZLE MAINTENANCE SCHEDULE STORAGE OR WINTERIZING Use fresh high quality gas. Add stabilizer to fuel tank and run engine for 5 minutes before storage. Pump oil: Refer to owners manual supplied with this unit. Engine oil: Refer to engine manual supplied with this unit. Some units are equipped with a low oil sensor and adequate oil must be added or the unit will not start. Use only cold water. Don't operate unit with clogged or missing water filter/screen. Don't operate unit without adequate water supply to pump. Adequate water supply is a minimum of 20 psi and 5 gpm. The pressure setting is preset at the factory to achieve optimum cleaning. If you need to lower the pressure setting, refer to the owners manual for proper procedure. Pull gun trigger every 2 minutes while engine is running. Don't allow water to freeze in pump. Siphon RV antifreeze into pump for cold weather storage or long term storage. Never leave unit running for more than 2 minutes without pulling gun trigger; doing so may damage pump and void warranty. Pump is equipped with a thermal relief valve. If the water overheats, this valve will open and allow a gush of water to escape. Once the water is released, the valve closes allowing ...

Эта инструкция также подходит к моделям:
Моечное оборудование - D26183-025-1 (473.96 kb)
Моечное оборудование - D26183-025-1 (473.96 kb)
Моечное оборудование - D26183-025-1 (473.96 kb)
Моечное оборудование - D26183-025-1 (473.96 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории