Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
If the supply cord is damaged, it must be replaced by themanufacturer, an authorized Black & Decker Service Centre or an equally qualied person in order to avoid ahazard. If the supply cord is replaced by an equally qualied person, but not authorized by Black & Decker, the warranty will lose eect. ACCIDENT HAZARD DISCHARGE residual pressure before disconnecting the unit hose. INJURY HAZARD 2.2.8 Before using the appliance, CHECK every time that the screws are fully tightened and that there are no broken or worn parts. ACCIDENT HAZARD 2.2.9 ONLY USE detergents which will not corrode the coating materials of the high pressure hose/electrical cable. EXPLOSION AND ELECTRIC SHOCK HAZARD 2.2.10 ENSURE that all people or animals keep a minimum distance of 16 yd. (15m) away. INJURY HAZARD 2.2.11 READ INSTRUCTION MANUAL BEFORE USE 18English 3 GENERAL INFORMATION FIG.1 3.1 Use of the manual This manual forms an integral part of the appliance and should be kept for future reference. Please read it carefully before installing/ using the unit. If the appliance is sold, the Seller must pass on this manual to the new owner along with the appliance. 3.2 Delivery The appliance is delivered partially assembled in a cardboard box. The supply package is illustrated in g.1. 3.2.1 Documentation supplied with the appliance A1 Use and maintenance manual 3.3 Disposing of packaging The packaging materials are not environmental pollutants but must still be recycled or disposed of in compliance with the relevant legislation in the country of use. 3.4 Safety signs Comply with the instructions provided by the safety signs ted to the appliance. Check that they are present and legible; otherwise, replacements in the original positions. E1 sign – Indicates that the appliance must not be disposed of as municipal waste; it may be handed in to the dealer on purchase of a new appliance. The appliance's electrical and electronic parts must not be reused for improper uses since they contain substances which constitute health hazards. 3.4.1 Symbols E2 symbol – Indicates that the appliance is intended for professional use, i.e. for experienced people informed about the relative technical, regulatory and legislative aspects and capable of performing the operations necessary for the use and maintenance of the appliance. E3 symbol – Indicates that the appliance is intended for non-professional (domestic) use. 4 TECHNICAL INFORMATION G.1 4.1 Envisaged use This appliance has been designed for individual use for the cleaning of vehicles, machines, boats, masonry, etc, to remove stubborn dirt using clean water and biodegradable chemical detergents. Vehicle engines may be washed only if the dirty water is disposed of as per regulations in force. -Intake water temperature:See data plate on the appliance. -Intake water pressure:Bel ow 10 bar. -Operating ambient temperature:Above 0°C. 4.2 Operator The symbol on the front cover iden the appliance’s intended operator (professional or non-professional). 4.3 Improper use Use by unskilled persons or those who have not read and understood the instructions in the manual is forbidden. The introduction of e, explosive and toxic liquids into the appliance is prohibited. Use of the appliance in a potentially or explosive atmosphere is forbidden. The use of non-original spare parts and any other spare parts not intended for the model in question is prohibited. All ations to the appliance are prohibited. Any ations made to the appliance shall render the Declaration of Conformity null and void and relieve the manufacturer of all liability under civil and criminal law. 4.4 Main components B1 Adjustable spray nozzle B2 Lance B3 Gun with safety catch B4 Power supply cable with plug B5 High pressure hose B6 Detergent tank (on models with this feature) 4.4.1 Accessories (where applicable – see g.1). C1 Nozzle cleaning tool C2 Handle 4.5 Safety devices Caution -Danger! Do not tamper with or adjust the safety valve setting. -Safety valve and pressure limiting valve. The safety valve is also a pressure limiting valve. When the gun trigger is released, the valve opens and the water recirculates through the pump inlet. -Safety catch (D): prevents accidental spraying of water. 5 INSTALLATION IG.2 5.1 Assembly Caution -Danger! All installation and assembly operations must be performed with the appliance disconnected from the mains power supply. The assembly sequence is illustrated in g.2. 5.2 Assembling the rotating nozzle (For models with this feature) The rotating nozzle kit delivers greater washing power. 5.3 Electrical connection Caution -Danger! Check that the electrical supply voltage and frequency (V-Hz) correspond to those on the appliance data plate g.2). The appliance should only be connected to a mains power supply equipped with an adequate earth connection and a d erential security breaker (30 mA) to cut the electricity supply in the instance of a short circuit. 5.3.1 Use of extension cables Use cables featuring “IP25” pr...
Эта инструкция также подходит к моделям:Моечное оборудование - PW1400 (5.85 mb)