Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
2.2.12 rEAd iNSTruCTioN mANuAL BEForE uSE 15 ENGLISH 3 GENERAL INFORMATION (FIG.1) 3.1 Use of the manual This manual forms an integral part of the appliance and should be kept for future reference. Please read it carefully before installing/ using the unit. if the appliance is sold, the Seller must pass on this manual to the new owner along with the appliance. 3.2 Delivery The appliance is delivered partially assembled in a cardboard box. The supply package is illustrated in Fig.1. 3.2.1 Documentation supplied with the appliance A1 use and maintenance manual 3.3 Disposing of packaging The packaging materials are not environmental pollutants but must still be recycled or disposed of in compliance with the relevant legislation in the country of use. 3.4 Safety signs Comply with the instructions provided by the safety signs fitted to the appliance. Check that they are present and legible; otherwise, fit replacements in the original positions. 4 TECHNICAL INFORMATION (FIG.1) 4.1 Envisaged use This appliance has been designed for individual use for the cleaning of vehicles, machines, boats, masonry, etc, to remove stubborn dirt using clean water and biodegradable chemical detergents. Vehicle engines may be washed only if the dirty water is disposed of as per regulations in force. -intake water temperature: see data plate on the appliance. -intake water pressure: below 10 bar. -operating ambient temperature above 0°C. 4.2 Operator The symbol on the front cover identifies the appliance’s intended operator (professional or non-professional). 4.3 Improper use use by unskilled persons or those who have not read and understood the instructions in the manual is forbidden. The introduction of inflammable, explosive and toxic liquids into the appliance is prohibited. use of the appliance in a potentially inflammable or explosive atmosphere is forbidden. The use of non-original spare parts and any other spare parts not specifically intended for the model in question is prohibited. All modifications to the appliance are prohibited. Any modifications made to the appliance shall render warranty. 4.4 Main components B1 Adjustable spray nozzle B2 Lance B3 gun with safety catch B4 Power supply cable with plug B5 high pressure hose B6 detergent tank B7 quick Connector 4.4.1 Accessories C1 Nozzle cleaning tool C2 handle C3 hose reel 4.5 Safety devices Caution - Danger! Do not tamper with or adjust the safety valve setting. -Safety valve and pressure limiting valve. The safety valve is also a pressure limiting valve. When the gun trigger is released, the valve opens and the water recirculates through the pump inlet. -Safety catch (D): prevents accidental spraying of water. 5 ELECTRICAL CONNECTION 5.1 Assembly Caution - Danger! All installation and assembly operations must be performed with the appliance disconnected from the mains power supply. The assembly sequence is illustrated in FIG.2. 5.2 Electrical connection The electrical connection should be made by a qualified electrician and should comply with regulations. Caution - Danger! Check that the electrical supply voltage and frequency (V-Hz) correspond to those specified on the appliance data plate (FIG.2). The appliance should only be connected to a mains power supply equipped with an adequate earth connection and a differential security breaker (30 mA) to cut off the electricity supply in the instance of a short circuit. 5.2.1 Use of extension cables use cables featuring “iPX5” protection level. The cross-section of the extension cable should be proportionate to its length; the longer it is, the greater its cross-section should be. Follow the instructions in Table i on page 5. inadequate extension cables can be dangerous. 5.3 Water supply connection Caution - Danger! Only clean or filtered water should be used for intake. The delivery of the water intake tap should be equal to that of pump capacity. Place the appliance as close to the water supply system as possible. 5.3.1 Connection points l Water outlet (ouTLET) n Water inlet with filter (iNLET) 5.3.2 Connection to the mains water supply The appliance can be connected directly to the mains drinking water supply only if the supply hose is fitted with a backflow preventer valve as per current regulations in force. make sure that the hose is at least O 13 mm and that it is reinforced. 6 STARTING THE APPLIANCE 6.1 Connecting to the mains water system / water supply detergent flow is adjusted using the regulator (F). 6.1.1 Warning. Comply strictly with the technical regulations and standards of the local water supply company. Ensure that the water mains connection complies with the data provided in the appliance’s technical specifications. 6.1.2 Connect the water supply hose (not supplied) to the appliance’s intake connection (FIG.2.3). 6.1.3 Turn on the water supply. 6.1.4 Vent the air from the appliance. To vent the air from the appliance, set the nozzle (B1 FIG.1) in low pressure mode (fully forward) and press the trigger (...