Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
This new type of seal allows easy cleaning. Solid stainless steel breaker bar (adjustable four positions) Heavy duty stainless steel main shaft Single end belt drive with integral gearhead motor mounted on adjustable base eliminates binder Main motor can be replaced from the back or the drive side (depending on option) Standard agitator RPM: 35/70 (other RPM's are available as options) Manual central lubrication system Top Assembly • 12" (305 mm) O.D. butterfly or sliding flour gate • Two stainless steel liquid inlets • Canopy scraper • Flour vent Tilting Assemblies • Hydraulic tilt on all models include: - Hydraulic unit with manual back-up pump - Hydraulic cylinder Mechanical Overtilt Options Agitator Drive Side Mixer Top Canopy With Multiple Flour Inlets and Sponge Door Sanitary Main Shaft Seal Hydraulic Tilt Mechanism Side Operator panel is NEMA 4 rated and contains the following: • Allen Bradley PanelView 550 operator interface which displays: - Mixing and refrigeration time - Dough temperature - Status and alarm messages - Editable product codes and recipes - Total operation time clock • Allen Bradley push-buttons for the following functions: - Mixing (slow, fast, stop) - Tilting (lower, raise, stop) - Alarm (acknowledge/reset) - Safety - Emergency stop NEMA 12 remote enclosure (painted steel) including: - Main breaker - Full voltage magnetic NEMA rated consequent pole starter - Allen Bradley SLC 5/03 processor • Wash down duty Weg drive motor (aluminum or copper rotor) integral mount with NORD gear reducer • Motor overheat protection installed in the stator winding • High/low speed jog operation with special anti-jog function • Mixer and refrigeration mode selection from operator interface • Timer and setpoint based temperature control modes included • Safety: Latching safety devices on ingredient and access doors interlocked with agitator motion monitor. • Standard voltage 460 and 600 volts / 3 Phase / 60 Hz (other voltages available) • Control power: 24 VDC inputs, 120 VAC outputs MECHANICAL OPTIONS Lip extension Bowl end cooling PolarBar refrigerated breaker bar (includes bowl end cooling option) ArcticAgitator cooling package (provides bowl end, breaker bar and standard agitator cooling) Double extra heavy duty stainless steel primary agitator bars (included in models 2000 lb. and above) ___ Y-T asymmetrical full split stainless steel agitator Arctic Cooling Extra liquid inlet I " — nn Package Additional flour inlet (available only with butterfly valve) Rear sponge door, air operated hinge type Rear ingredient door with safety bars and agitator motion interlock Solid, full length legs with high performance stainless steel pigmented gray epoxy paint up to 24" (610 mm) Mechanical overtilt to 140 degrees on 1600 lb. to 3200 lb. models include: - Integral gearhead brake motor with chain and sprockets - Caliper and disk bowl lock mechanism - Air driven hydraulic pump for calipers Me...
Эта инструкция также подходит к моделям:Миксеры - TILT Bowl Mixer (TBM) (359.19 kb)
Миксеры - TILT Bowl Mixer (TBM) (359.19 kb)