Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Do not use a steam cleaner. Do not adjust the swivel arm while the appliance is switched on. Wait until the drive has come to a standstill. Do not change tool/accessory until the drive is at a standstill – when the appliance is switched off, the drive continues running briefly. Use only the rotary switch to switch the appliance on or off. When the appliance is not in use, pull out the mains plug. Before eliminating a fault, pull out the mains plug. Risk of injury from the rotating tools! Keep hands clear of rotating parts. While the appliance is operating, never place fingers in the mixing bowl. Attach the cover (12) before operating the appliance! Do not change tools until the drive has come to a standstill – when the appliance is switched off, the drive continues running briefly and stops in the tool change position. Do not move the swivel arm until the tool has come to a standstill. For reasons of safety the appliance cannot be operated unless unused drives are covered with drive guards (5, 8). Before attaching/removing the continuous-feed shredder, wait until the drive has come to a standstill and pull out the mains plug. Do not reach into the feed tube. Robert Bosch Hausgerate GmbH en Risk of injury from sharp blades! Do not grip the sharp blades or edges of the cutting discs. Take hold of cutting discs by the edge only. Do not touch blender blades with bare hands. Risk of injury from sharp blades/rotating drive! Never place fingers in the attached blender! Do not remove/attach the blender until the drive is at a standstill! Operate the assembled blender only and with the lid attached. Risk of scalding! If processing hot liquids, steam escapes through the funnel in the lid. Add a max. 0.5 litres of hot or frothing liquid. Important! Use the appliance with original accessories only. When using the accessories, follow the enclosed operating instructions. Use only one tool or accessory at any one time. , Explanation of the symbols on the appliance or accessory Follow the instructions in the operating instructions. Caution! Rotating blades. Caution! Rotating tools. Do not place fingers in the feed tube. Safety systems Start lock-out See “Operating positions” table. The appliance can be switched on in pos. 1 and 3 only: – when the bowl (11) has been inserted and turned until it locks into place and – the blender drive cover has been attached (9). Restart lock-out If the power is interrupted, the appliance remains switched on but the motor does not start running again when the power is restored. To switch the appliance on again, turn the rotary switch to 0/off, then switch on. Overload protection If the motor switches itself off while the appliance is being used, the overload protection feature has been activated. A possible cause may be that too much food was processed at one time. If a safety system is activated, see “Troubleshooting”. Robert Bosch Hausgerate GmbH The operating instructions describe several models, see also overview of models (Fig. .). The appliance requires no maintenance. Overview Please fold out the illustrated pages. Fig. . Base unit 1 Release button 2 Swivel arm “Easy Armlift” function to support the upward movement of the arm (see “Work positions”). 3 Rotary switch When the appliance has been switched off (position 0/off), the appliance runs automatically to the optimum position for changing the tools. MUM52..: 0/off = Stop M = Pulse switch at maximum speed, grip switch for required blending duration. Settings 1–4, Operating speed: 1 = low speed – slow, 4 = high speed – fast. MUM54../MUM56..: 0/off = Stop M = Pulse switch at maximum speed, grip switch for required blending duration. Settings 1–7, Operating speed: 1 = low speed – slow, 7 = high speed – fast. 4 On/Off display (MUM54../56..) Is lit while the appliance is operating (rotary switch on M or 1–7). Flashes if the appliance has been operated incorrectly, the electronic fuse has tripped or the appliance is defective – see section entitled “Troubleshooting”. 5 Drive for – continuous-feed shredder and – citrus press (special accessory *). When not in use, attach the drive cover. 6 Drive cover To remove the drive cover, press on the rear area and remove cover. 7 Drive for tools (stirrer, whisk, kneading hook) and mincer (special accessory *) 8 Drive for blender (special accessory *) When not in use, attach the blender drive cover. 9 Blender drive cover en 10 Cord store MUM52../MUM54..: Stow the cord in the cord store. MUM56..: Automatic cord winder Bowl with accessories 11 Stainless steel stirring bowl 12 Lid Tools 13 Stirrer 14 Whisk 15 Kneading hook with dough deflector 16 Accessories bag For storage of the tools and cutting discs. Continuous-feed shredder 17 Pusher 18 Cover with filling shaft 19 Cutting discs 19a Reversible slicing disc – thick/thin 19b Reversible shredding disc – coarse/fine 19c Grating disc – medium-fine 20 Drive shaft 21 Housing with outlet opening Blender * 22 Blender jug 23 Lid 24 Funnel * If an accessory ...
Эта инструкция также подходит к моделям:Миксеры - MUM54530AU/02 (4.1 mb)
Миксеры - MUM54630AU/01 (4.1 mb)
Миксеры - MUM54630AU/02 (4.1 mb)