Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Медиа-плееры - PTV3000 (193.94 kb)
Медиа-плееры - PTV3000 (319.79 kb)
Фрагмент инструкции
For more information, see Resolve Firewall Issues on page 40. 2.Start Intel WiDi by clicking the Intel WiDi icon. The Connected adapter screen displays. Intel WiDi now scans for adapters. 3.Select the Push2TV adapter. 4.Click the Connect button. Intel WiDi should connect to the Push2TV adapter. 1.Update the firmware. For more information, see Update the Software on page 33. 2.Start Intel WiDi by clicking the Intel WiDi icon. The Connected adapter screen displays. Intel WiDi now scans for adapters. 3.Select the Push2TV adapter. 4.Click the Connect button. Intel WiDi should connect to the Push2TV adapter. Known Issues This section lists known Intel WiDi issues and workarounds. •After you stop using the Intel WiDi application, you might have to manually enable the laptop’s sound. For more information, see Adjust the Sound on page 27. •If Intel WiDi is located in the Windows startup group, the application usually does not work. •Wait until Microsoft Windows has fully booted before opening Intel WiDi. •If the media application in use can be set to mute or unmute only for both the laptop and TV at the same time, NETGEAR recommends that you use a different media application. •Pressing Control + Alt + Delete on the laptop might freeze the TV image. •Changing the wireless LAN or connection settings when Intel WiDi is connected might cause momentary disruption of or end the connection. Note:For analog TVs, the Push2TV adapter does not support NTSC (National Television System Committee) format 4.43 variations on the composite interface. See the TV owner’s manual for NTSC variation information. A. Factory Settings and Technical Specifications This appendix covers the following topics: •Return the Push2TV Adapter to Factory Default Settings •Technical Specifications You can use the Reset button to restore factory default settings or to change the language (see Change the Display Language on page 34). Reset button Figure 4. Reset button This procedure erases the security code for your Push2TV adapter. After you do this, you need to set up the Push2TV adapter again to function with your TV and your laptop as described in the previous chapters. 1.Turn on the Push2TV adapter. 2.Wait until the LED turns solid and the TV screen shows Ready for connection. 3.Using a paperclip, press and hold the Reset button for more than 5 seconds. The LED turns off and then starts blinking. 4.Release the Reset button when the LED starts blinking. The Push2TV adapter returns to its factory default settings. B. Notification of Compliance NETGEAR adapters Regulatory Compliance Information This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority. This product’s firmware limits operation to only the channels allowed in a particular Region or Country. Therefore, all options described in this user's guide may not be available in your version of the product. Europe – EU Declaration of Conformity Products bearing themarking comply with the following EU directives: If this product has telecommunications functionality, it also complies with the requirements of the following EU Directive: Compliance with these directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity. For indoor use only. Valid in all EU member states, EFTA states, and Switzerland. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. FCC Requirements for Operation in the United States FCC Information to User FCC RF Radiation Exposure Statement RF Exposure Information FCC Declaration of Conformity FCC Radio Frequency Interference Warnings and Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods: Canadian Department of Communications Radio Interference Regulations This digital apparatus (Push2TV Wireless ...