Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Материнские платы - GA-H81M-S2PV (9.09 mb)
Материнские платы - GA-H81M-S2PV (8.99 mb)
Материнские платы - GA-H81M-S2PV (9.78 mb)
Материнские платы - GA-H81M-S2PV (10.05 mb)
Фрагмент инструкции
Serial Port Use the serial port to connect devices such as a mouse, modem or other peripherals. USB 3.0/2.0 Port The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. RJ-45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs. Connection/ Speed LED Activity LED: Connection/Speed LED: Activity LED State Description Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring State Description Orange 1 Gbps data rate Green 100 Mbps data rate Off 10 Mbps data rate LAN Port (Note) The DVI-D port does not support D-Sub connection by adapter. USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. Line In Jack (Blue) The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc. Line Out Jack (Green) The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration. Mic In Jack (Pink) The Mic in jack. Microphones must be connected to this jack. To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. ••When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. ••When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. 1-7 Internal Connectors 1 2 6 11 5 3 4 12 8 7 10 9 1) ATX_12V_2X4 2) ATX 3) CPU_FAN 4) SYS_FAN 5) SATA3 0/1 6) SATA2 2/3 7) F_PANEL 8) F_AUDIO 9) F_USB1/F_USB2 10) LPT 11) BAT 12) CLR_CMOS Read the following guidelines before connecting external devices: ••First make sure your devices are compliant with the connectors you wish to connect. ••Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. ••After installing the device and before turning on the computer, make sure the device cable has been securely attached to the connector on the motherboard. 1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed. The power connector possesses a foolproof design. Connect the power supply cable to the power connector in the correct orientatio...