Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Line Out Jack (Green) The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended that you connect your headphone/speaker to this jack (actual effects may vary by the device being used). Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration. Mic In Jack (Pink) The Mic in jack. Microphones must be connected to this jack. The audio jacks can be reconfigured to perform different functions via the audio software (supported functions may vary based on hardware specification). If you install a Side Speaker, you need to retask other audio jack to be Side Speaker out. Only microphones still MUST be connected to the default Mic in jack. Refer to the instructions on setting up a 2/4/5.1/7.1-channel audio configuration in Chapter 6, "Configuring 2/4/5.1/7.1-Channel Audio." Hardware Installation F_USB30F_UB_ F_S 123 123 123 1231111BSSS_SS3BSSSU__3F_S_ S_SF F_USB30F_UB_ F_S 123 123 123 1231111BSSS_SS3BSSSU__3F_S_ S_SF 1-8 Onboard Buttons, Switches and LEDs DualBIOS Switch and BIOS LEDs The DualBIOS switch (SB) allows enabling or disabling of the Dual BIOS function. The LED indicator (MBIOS_ LED/BBIOS_LED) shows which BIOS is active. DualBIOS Switch: SB SB 2 1: Dual BIOS 1 2 2: Single BIOS 1 BIOS LED Indicators: MBIOS_LED (The main BIOS is active) BBIOS_LED (The backup BIOS is active) MBIOS_LED BBIOS_LED Quick Buttons This motherboard has four quick buttons: Power, Reset, Clear CMOS, and Clear Battery. The power button and reset button allow users to quickly turn on/off or reset the computer in an open-case environment when they want to change hardware components or conduct hardware testing. Use this button to clear the BIOS configuration and reset the CMOS values to factory defaults when needed. The Clear Battery button has the same function as removing the battery from the motherboard. PW_SW: Power Button RST_SW: Reset Button CMOS_SW: Clear CMOS Button CBAT_SW..Clear Battery Button PW_SW RST_SW CBAT_SW CMOS_SW ••Always turn off your computer and unplug the power cord from the power outlet before using the clear CMOS button. ••Always turn off the power of the power supply before using the clear battery button. After pressing this button, make sure to wait for five minutes before you turn on the computer. ••Do not use the clear CMOS or clear battery button when the system is on, or the system may shutdown and data loss or damage may occur. ••After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). Hardware Installation F_USB30F_UB_ F_ F__B SB_B_SS__B_U_BS 123 123 123 1231111BSSS_SS3 BSSSU__ 3F_USB3F S _ S _SF F_USB30F_UB_ F_ F__B SB_B_SS__B_U_BS 123 123 123 1231111BSSS_SS3 BSSSU__ 3F_USB3F S _ S _SF F_USB30F_UB_ F_ F__B SB_B_SS__B_U...