Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
CAS Latency (tCL) Display the CAS Latency (tCL) information of installed memory. Minimum delay time CAS to RAS (tRCDmin) Display the CAS to RAS (tRCDmin) information of installed memory. Row Precharge (tRPimin) Display the Row Precharge (tRPimin) information of installed memory. Active to Precharge (tRCDmin) Display the Active to Precharge (tRCDmin) information of installed memory. BIOS Setup Memory Frequency Limiter Maximum Memory Frequency Selections in Mhz. Options available: Auto/1067/1333/1600/1867/2133/2400/2667. Default setting is Auto. Max TOLUD Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller. Options available: Dynamic/3.5 GB/3.25 GB/3 GB/2.75 GB/2.5 GB/2.25 GB/2 GB/1.75 GB/1.5 GB/ 1.25 GB/1 GB. Default setting is Dynamic. BIOS Setup 2-3-2 PCH-IO Configuration Intel PCH RC Version/Intel PCH SKU/Intel PCH Rev ID Information Displays the RC version, SKU and Reverison ID information of PCH. PCI Express Configuration Press [Enter] for configuration of advanced items. USB Configuration Press [Enter] for configuration of advanced items. DeepSx Power Policies Configure the DeepSx Mode configuration. Options available: Disabled/Enabled in S5/Enabled in S4-S5. Default setting is Disabled. GP27 Wake From DeepSx Wake from DeepSx by the assertion of GP27 pin. Options available: Enabled/Disabled. Default setting is Enabled. PCIE Wake From DeepSx Wake from DeepSx by the assertion of PCIe. Options available: Enabled/Disabled. Default setting is Disabled. Serial IRQ Mode Configure Serial IRQ Mode. Options available: Quiet/Continuous. Default setting is Quiet. SB CRID Enable/Disable SB CRID. Options available: Enabled/Disabled. Default setting is Disabled. BIOS Setup SLP_S4 Assertion Width Select a minimum assertion width of the SLP_S4# signal. Options available: 1-2 Seconds/2-3 Seconds/3-4 Seconds/4-5 Seconds. Default setting is 4-5 Seconds. Restore AC Power Loss This option provides user to set the mode of operation if an AC / power loss occurs. Power On: System power state when AC cord is re-plugged. Power Off: Do not power on system when AC power is back. Last State: Set system to the last sate when AC power is removed. Options available: Power On/Power Off/Last State. Default setting is Last State. BIOS Setup 2-3-2-1 PCI Express Configuration PCI Express Clock Gating Enable/Disable PCI Express Clock Gating for each root port. Options available: Enabled/Disabled. Default setting is Enabled. DMI Link ASPM Control The control of Active State Power Management on both NB side and SB side of the DMI Link. Options available: Enabled/Disabled. Default setting is Disabled. DMI Link Extended Synch Control The control of Extended Synch on SB side of the DMI Link. Options available: Enabled/Disabled. Default setting is Disabled. PCIe-USB Glitch W/A PCIe-USB Glitch W/A for bad USB device(s) connected behind PCIE/PEG Port. Options available: Enabled/Disabled. Default setting is Disabled. PCIe Root Port Function Swapping Options available: Enabled/Disabled. Default setting is Disabled. BIOS Setup 2-3-2-2 USB Configuration USB Configuration USB Precondition Precondition work on USB host controller and root ports for faster enumeration. Options available: Enabled/Disabled. Default setting is Disabled. XHCI Mode Mode of operation of xHCI controller. Options available: Smart Auto/Auto/Enabled/Disabled/Manual. Default setting is Smart Auto. BTCG Options available: Enabled/Disabled. Default setting is Enabled. USB Ports Per-Port Disable Control Control each of the USB ports (0~13) disabling. Options available: Enabled/Disabled. Default setting is Disabled. BIOS Setup 2-3-3 Intel Server Platform Services Intel Server Platform Services Enable/Disable Intel Server Platform Services Help. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup 2-4 Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Administrator Password Entering this password will allow the user to access and change all settings in the Setup Utility. • User Password Entering this password will restrict a user’s access to the Setup menus. To enable or disable this field, a Administrator Password must first be set. A user can only access and modify the System Time, System Date, and Set User Password fields. Administrator Password Press Enter to configure the Administrator password. User Password Press Enter to configure the user password. Secure Boot menu Press [Enter] for configuration of advanced items. BIOS Setup 2-4-1 Secure Boot menu The Secure Boot Menu is applicable when your device is installed the Windows® 8 operatin system. Platform Mode Display the System Platform Mode State. Secure Boot Display the status of Secure Boot. Secure Boot Control Enable/Disable Secure Boot function. Options available: Enabled/Disabled. Defau...