Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Post Error Pause ..All Errors Whenever the BIOS detects a non-fatal error the system will be stopped. ..All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other errors. (Default setting) ..No Errors The system boot will not stop for any error that may be detected and you will be prompted. • .......... After Power Failure This option provides user to set the mode of operation if an AC / power loss occurs. ..Power On System power state when AC cord is re-plugged. ..Stay Off Do not power on system when AC power is back. ..Last State Set system to the last sate when AC power is removed. Do not power on system when AC power is back. (Default setting) • ..........NumLock This option allows user to select power-on state for NumLock. .. On Enable NumLock. (Default setting) .. Off Disable this function. 46 BIOS Setup DMI Event Logging Figure 2-9: DMI Event Logging • ..........Event log vaildity/Event log capacity These two items display the current status of Event log vaildity and Event log capacity. • ..........ViewDMI event log Press [Enter] to view DMI event log. • ..........Event Logging .. Enabled Select Enabled to allow logging of DMI events. (Default setting) .. Disabled Disable this function. 47 GA-3CESL-RH Motherboard • ..........ECC Memory Logging .. Enabled Select Enabled to allow logging of killed memory. (Default setting) .. Disabled Disable this function. • ..........Mark DMI events as read Press [Enter] to mark all DMI events in the event log as read. • ..........Clear all Event Logs .. Yes Clear all event logs. .. No Disable this function. (Default setting) 48 BIOS Setup Hardware Monitor Figure 2-10: Hardware Monitor 49 GA-3CESL-RH Motherboard 50 BIOS Setup • ..........CPU1/CPU 2/ SystemTemperature ..Display the current CPU1/2 temperature and system temperature. • ..........Voltage Monitor: VCORE1/2, 3.3V, 5V, -12V, +12V, 1.5V, P1 1.8V, P2 1.8V, P1 0.9V, P2 0.9V ..Detect system's voltage status automatically. • ..........FAN Monitor: CPU1/2 FAN, MCP55 FAN, SYS1/2 FAN ..Display the current front fanspeed, rear fan speed, and CPU fan speed. 51 GA-3CESL-RH Motherboard Security • ..........• About This Section: Security In this section, user can set either supervisor or user passwords, or both for different level of password securities. In addition, user also can set the virus protection for boot sector. Figure 3: Security • ..........Set Supervisor Password You can install and change this options for the setup menus. Type the password up to 6 characters in lengh and press