Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
(Default setting) 56 GA-7TESH2-RH Motherboard NumLock This option allows user to select power-on state for NumLock. On Enable NumLock. (Default setting) Off Disable this function. 57 GA-7TESH2-RH Motherboard Thermal and Acoustic Configuration Figure 2-8: Thermal and Acoustic Configuration Open loop Thermal Throttle Enabled Open loop Thermal Throttle. (Default setting) Disabled Disable Open loop Thermal Throttle. Temperature Chassis inlet This item is user defined. Use nuber key to adjust desired value. Temperature Rise This item is user defined. Use nuber key to adjust desired value. Air speed to the DIMMs This item is user defined. Use nuber key to adjust desired value. System Altitude This item is user defined. Use nuber key to adjust desired value. Pitch between DIMMs This item is user defined. Use nuber key to adjust desired value. 58 GA-7TESH2-RH Motherboard Close loop Thermal Throttle Enabled Close loop Thermal Throttle. (Default setting) Disabled Disable Close loop Thermal Throttle. Temperature Hysteresis This item is user defined. Use nuber key to adjust desired value. Temperature Guardband This item is user defined. Use nuber key to adjust desired value. Temperature Chassis inlet This item is user defined. Use nuber key to adjust desired value. Temperature Rise This item is user defined. Use nuber key to adjust desired value. Air speed to the DIMMs This item is user defined. Use nuber key to adjust desired value. System Altitude This item is user defined. Use nuber key to adjust desired value. Pitch between DIMMs This item is user defined. Use nuber key to adjust desired value. 59 GA-7TESH2-RH Motherboard Power Figure 3: Power Power On by RTC Alarm You can set item to Enabled and key in Date/Time to power on system. On Enable alarm function to POWER ON system. (Default setting) Off Disable this function. If Resume On Time is set to On status: RTC Alarm control select: Manual/Auto Time (0~23) : (0~59) : (0~59) Power On PCI & PCIE Devices Enabled Enable Power On PCI & PCIe Devices. (Default setting) Disabled Disable this function. Resume On Modem Ring On Enable Resume on Modem Ring. Off Disable Resume on Modem Ring. (Default setting) 60 BIOS Setup After Power Failure This option provides user to set the mode of operation if an AC / power loss occurs. Power On System power state when AC cord is re-plugged. Stay Off Do not power on system when AC power is back. Last State Set system to the last sate when AC power is removed. Do not power on system when AC power is back. (Default setting) 61 GA-7TESH2-RH Motherboard Security • .....About This Section: Security In this section, user can set either supervisor or user passwords, or both for different level of password securities. In addition, user also can set the virus protection for boot sector. Figure 4: Security Set Supervisor Password You can install and change this options for the setup menus. Type the password up to 6 characters in lengh and press