Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Gigabyte, модель GA-7VM

Производитель: Gigabyte
Размер: 867.04 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Set System Bus Speed SW4: O : ON, X : OFF 4 3 2 1 CPU PCI Spectrum X X X X 133.3 33.3 5% O X X X 100.2 33 5% X O X O 110 36.7 X O X X O 115 38.3 X O O X O 120 30 X X X O X 133.3 33.3 X O X O X 100.2 33.3 X X X O O 124 31 X X O O O 129 32.3 X O X O O 138 34.5 X O O O O 143 35.8 X 7 Connectors Connectors GAME & Audio Port MIC GAME Port Line In Line Out COM 1 / COM 2 / LPT Port COM 1 COM 2 LPT PORT 8 7VM Motherboard USB Connector 1 2 3 4 8765 Pin No. Definition 1 USB V0 2 USB D0- 3 USB D0+ 4 GND 5 USB V1 6 USB D1- 7 USB D1+ 8 GND PS/2 Keyboard & PS/2 Mouse Connector PS/2 Keyboard PS/2 Mouse 12 34 56 PS/2 Mouse/ Keyboard Pin No. Definition 1 Data 2 NC 3 GND 4 VCC(+5V) 5 Clock 6 NC 9 Connectors J10: Power FAN 1 Pin No. Definition 1 GND 2 +12V 3 SENSE J5: CPU FAN 1 Pin No. Definition 1 GND 2 +12V 3 SENSE 10 7VM Motherboard J6: System FAN 1 Pin No. Definition 1 GND 2 +12V 3 SENSE ATX Power 11 1 20 10 Pin No. Definition 3,5,7,13,15-17 GND 1,2,11 3.3V 4,6,19,20 VCC 10 +12V 12 -12V 18 -5V 8 Power Good 9 5V SB stand by+5V 14 PS-ON(Soft On/Off) 11 Connectors Floppy Port RED LINE IDE1 (Primary) , IDE2 (Secondary) Port RED LINE IDE 1 IDE 2 12 7VM Motherboard USB2 : USB Port 1 4 8 5 Pin No. Definition 1 VCC 2 USB D0. 3 USB D0+ 4 GND 5 VCC 6 USB D1. 7 USB D1+ 8 GND IR : Infrared Connector 1 Pin No. Definition 1 VCC (+5V) 2 NC 3 IR Data Input 4 GND 5 IR Data Output 13 Connectors JP3 : STR LED Connector & LED1 (DRAM LED) LED1 + (DRAM LED) 1 JP3 STR LED Connector External. J3 : Modem Wake Up (Internal Modem Card Wake Up) 1 Pin No. Definition 1 Signal 2 GND 14 7VM Motherboard J4 : LAN Wake Up 1 Pin No. Definition 1 +5V SB 2 GND 3 Signal J12 TEL: The connector is for Modem with internal voice connector 1 Pin No. Definition 1 Signal-In 2 GND 3 GND 4 Signal-Out 15 Connectors J11:AUX_IN 1 Pin No. Definition 1 AUX-L 2 GND 3 GND 4 AUX-R J8 : CD Audio Line In 1 Pin No. Definition 1 CD-L 2 GND 3 GND 4 CD-R 16 7VM Motherboard Panel and Jumper Definition J2 : For 2X11 PINs Jumper REGN GD PWP.P.P+ S P K HD 1 1 1 1 GN (Green Switch) Open: Normal Operation Close: Entering Green Mode GD (Green LED) Pin 1: LED anode(+) Pin 2: LED cathode(.) HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode(.) SPK (Speaker Connector) Pin 1: VCC(+) Pin 2- Pin 3: NC Pin 4: Data(.) RE (Reset Switch) Open: Normal Operation Close: Reset Hardware System P+P.P.(Power LED) Pin 1: LED anode(+) Pin 2: LED cathode(.) Pin 3: LED cathode(.) PW (Soft Power Connector) Open: Normal Operation Close: Power On/Off 17 Panel and Jumper Definition JP2 : BIOS Write Protection 1 Pin No. Definition ON Write Protect Enable OFF Write Protect Disable (Default) JP6 : Front Panel USB Device Wake up Selection(Optional) 1 Pin No. Definition 1-2 close FP USB Wake Up 2-3 close Normal (Default) (If you want to use "USB KB/Mouse Wake from S3" function, you have to set the BIOS setting "USB KB/Mouse Wake from S3" enabled, and the jumper "JP6" enabled). *(Power on the computer and as soon as memory counting starts, press . You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then select "USB KB/Mouse Wake from S3: Enabled". Remember to save the setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.) 18 7VM Motherboard JP5 : Rear Panel USB Device Wake up Selection(Optional) JP4:STR Enable Pin No. Definition 1-2 close RP USB Wake Up 2-3 close Normal (Default) 1 (If you want to use "USB KB/Mouse Wake from S3" function, you have to set the BIOS setting "USB KB/Mouse Wake from S3" enabled, and the jumper "JP5" enabled). *(Power on the computer and as soon as memory counting starts, press . You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then select "USB KB/Mouse Wake from S3: Enabled". Remember to save the setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.) 1 Pin No. Definition ON STR Enabled OFF STR Disabled (Default) 19 Panel and Jumper Definition JP7/JP8/JP9: Onboard AC97& AMR Select (AMR• ........ Audio Modem Riser) 1 JP9 JP8 1 Jumper Function JP7 JP8 JP9 Onboard AC97 OFF 1-2 1-2 AMR (Primary) OFF 3-4 3-4 Onboard AC97+AMR (Secondary) ON 1-2, 3-4 1-2 JP7: AMR Primary / Secondary Select JP7 Pin No. Definition ON AMR Secondary (Default) OFF AMR Primary 20 7VM Motherboard BAT1 : Battery + Danger of explosion if batteryis incorrectly replaced. Replace only with the same orequivalent type recommendedby the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. 21 Performance List Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) • CPU AMD AthlonTM 800MHz processor • DRAM (128x1) MB SDRAM (MOSEL 9928PR V54C365804VCT7) • CACHE SIZE 512 KB included in CPU • DISPLAY GA-660 PLUS 32 (32MB) • ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории