Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
..(.......,..........,.....CMOS.....,. BIOS.........) CPU Frequency (MHz) (CPU....) ........CPU..........200 MHz.500 MHz. ...................... PCIE Clock (MHz)(PCI Express ..........) ........PCI Express................100 MHz.145 MHz. (...:100) CPU Clock Ratio (CPU....) ........CPU...........CPU.......(...:Auto) CPU NorthBridge Freq. (..CPU.........) ........CPU.................CPU....... (...:Auto) Set Memory Clock ...........................Manual..,..... ............ Auto BIOS..........(...) Manual ............... Memory Clock .......Set Memory Clock....Manual..,...... X4.00 ..Memory Clock.X4.00. X5.33 ..Memory Clock.X5.33. X6.66 ..Memory Clock.X6.66. X8.00 ..Memory Clock.X8.00. DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2010 Award Software DRAM Configuration Item Help Menu Level .. DCTs Mode (.) [Unganged] DDR3 Timing Items [Auto] SPD Auto x CAS# latency Auto 9T 9T x RAS to CAS R/W Delay Auto 9T 9T x Row Precharge Time Auto 9T 9T x Minimum RAS Active Time Auto 24T 24T x 1T/2T Command Timing Auto -- -- x TwTr Command Delay Auto 5T 5T x Trfc0 for DIMM1 Auto 110ns 110ns x Trfc2 for DIMM2 Auto -- -- x Trfc1 for DIMM3 Auto -- -- x Trfc3 for DIMM4 Auto -- -- x Write Recovery Time Auto 10T 10T x Precharge Time Auto 5T 5T x Row Cycle Time Auto 33T 33T x RAS to RAS Delay Auto 4T 4T CKE Power Down Mode [Disabled] CKE Power Down Control [per Channel] ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults DCTs Mode (......) (.) ............... Ganged ............... Unganged ...............(...) DDR3 Timing Items ........Manual..,............... ....:Auto (...).Manual. CAS# latency ....:Auto (...).4T~12T. RAS to CAS R/W Delay ....:Auto (...).5T~12T. Row Precharge Time ....:Auto (...).5T~12T. Minimum RAS Active Time ....:Auto (...).15T~30T. 1T/2T Command Timing ....:Auto (...).1T.2T. (.) ..............CPU. TwTr Command Delay ....:Auto (...).4T~7T. Trfc0 for DIMM1 ....:Auto (...).90ns.110ns.160ns .300ns.350ns. Trfc2 for DIMM2 ....:Auto (...).90ns.110ns.160ns .300ns.350ns. Trfc1 for DIMM3 ....:Auto (...).90ns.110ns.160ns .300ns.350ns. Trfc3 for DIMM4 ....:Auto (...).90ns.110ns.160ns .300ns.350ns. Write Recovery Time ....:Auto (...).5T~12T. Precharge Time ....:Auto (...).4T~7T. Row Cycle Time ....:Auto (...).11T~42T. RAS to RAS Delay ....:Auto (...).4T~7T. CKE Power Down Mode (......) .............CKE...............(...:Disabled) CKE Power Down Control (........) ..................,....:per Channel (...).per CS. DDR3 Voltage Control (.......) .................... Auto ............(...) +0.1V ~ +0.7V ......0.1V.0.7V. ...:................. CPU NB VID Control (CPU ..VID.....) ........CPU ..VID.........(...:Normal, ....CPU ..VID..) ...:........CPU............ CPU Voltage Control (CPU.....) ........CPU.....................CPU.... ..(...:Normal,....CPU.....) ...:........CPU............ Normal CPU Vcore (CPU......) ..CPU........ 2-4 Standard CMOS Features (..CMOS..) CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Standard CMOS Features Item Help Menu Level . Date (mm:dd:yy) Fri, Dec 31 2010 Time (hh:mm:ss) 22:31:24 } IDE Channel 0 Master [None] } IDE Channel 0 Slave [None] } IDE Channel 2 Master [None] } IDE Channel 3 Master [None] Drive A [1.44M, 3.5"] Floppy 3 Mode Support [Disabled] Halt On [All, But Keyboard] Base Memory 640K Extended Memory 1918M ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) (....) .........,......(....)/././...........,.. .................. Time (hh:mm:ss) (....) .........,.....:.:.............13:0:0... .......,.................... IDE Channel 0 Master/Slave (...../..IDE/SATA......) IDE HDD Auto-Detection ..