Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Gigabyte, модель GA-MA770T-UD3

Производитель: Gigabyte
Размер: 10.64 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


To delete an array , press <3> to enter the Delete LD window. To view controller settings, press <4> to enter the Controller Configuration window. View Drive Assignments........................... [ 1 ] Define LD.................................................. [ 2 ] Delete LD.................................................. [ 3 ] Controller Configuration............................ [ 4 ] Press 1..4 to Select Option [ESC] Exit Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. [ Main Menu ] [ Keys Available ] Figure 3 -75 -Appendix Create Arrays Manually To create a new array , press <2> to enter the Define LD window (Figure 4). The Define LD selection from the Main Menu allows users to begin the process of manually defining the drive elements and RAID levels for one or multiple disk arrays attached to the AMD SB710 controller. [.] Up [.] Down [ESC] Exit [Enter] Select Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. [ Keys Available ] [ Define LD Menu ] LD No RAID Mode Total Drv Capacity (GB) Status LD 1 ----------------- LD 2 LD 3 LD 4 LD 5 LD 6 LD 7 LD 8 LD 9 LD 10 Figure 4 In Figure 4, use the up or down arrow key to move to a logical disk set and press to enter the RAID configuration menu (Figure 5). [.] Up [.] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. [ Keys Available ] [ Define LD Menu ] LD No RAID Mode Total Drv LD 1 RAID 0 0 Stripe Block: 64 KB Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru [ Drives Assignments ] Channel:ID Drive Model Capabilities Capacity (GB) Assignment 1:Mas WDC WD800JD-22LSA0 SATA 3G 79.89 N 2:Mas WDC WD800JD-22LSA0 SATA 3G 80.02 N Figure 5 GA-MA770T-UD3/US3 Motherboard - 76 In the following procedure, we'll create RAID 0 as an example. 1. Under the RAID Mode section, press the key to select RAID 0. 2. Set the Stripe Block size. 64 KB is the default. 3. Under the Drives Assignments section, press the up or down arrow key to highlight a drive. 4. Press the key or to change the Assignment option to Y. This action adds the drive to the disk array . The Total Drv section will show the number of disks assigned. 5. Press + keys to save the information. The window below will appear. Fast Initialization option has been selected It will erase the MBR data of the disk. Figure 6 6. Press + to clear the MBR or press other keys to ignore this option. Then, the window below will appear. Press Ctrl-Y to Modify Array Capacity or press any other key to use maximum capacity... Figure 7 7. Press + to set the capacity of the RAID array or press other keys to set the array to its maximum capacity. 8. After the creation is complete, the screen will return to Define LD Menu where you will see the newly-created array. 9. Press to return to Main Menu and press again if you want to exit the RAID BIOS utility. View Drive Assignments The View Drive Assignments option in the Main Menu displays whether drives attached to the AMD SB710 controller are assigned to a disk array or are unassigned. Under the Assignment column, drives are labeled with their assigned disk array or shown as Free if unassigned. [.] Up [.] Down [ESC] Exit [Ctrl+H] Secure Erase [PgUp/Dn] Page Change Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. [ Keys Available ] [ View Drives Assignments ] Channel:ID Drive Model Capabilities Capacity (GB) Assignment 1:Mas WDC WD800JD-22LSA0 SATA 3G 79.89 Extent 1 79.82 LD 1 1 2:Mas WDC WD800JD-22LSA0 SATA 3G 80.2 Extent 1 80.02 LD 1 2 Figure 8 -77 - Appendix Delete an Array The Delete Array menu option allows for deletion of disk array assignments. Deleting an existing disk array could result in loss of data. Record all array information including the array type, the disk members, and stripe block size in case you wish to undo a deletion. 1. To delete an array, press <3> in the Main Menu to enter the Delete LD Menu. Then highlight the array you wish to delete and press the key or the + keys. 2. The View LD Definition Menu will appear (as shown in Figure 9) showing which drives are assigned to this array. Press + if you are sure to delete the array or other keys to abort. 3. When the array is deleted, the screen will return to Delete LD Menu. Press to return to Main Menu. Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. [ View LD Definition Menu ] LD No RAID Mode Total Drv Capacity (GB) Status LD 1 RAID 0 2 157.99 Functional Stripe Block: 64KB Cache Mode: WriteThru [ Drives Assignments ] Channel:ID Drive Model Capabilities Capacity (GB) 1:Mas WDC WD800JD-22LSA0 SATA 3G 79.89 2:Mas WDC WD800JD-22LSA0 SATA 3G 80.02 Press Ctrl-Y to delete the data in the disk! or press any other key to abort... Figure 9 GA-MA770T-UD3/US3 Motherboard - 78 5-1-2 Making a SATA RAID/AHCI Driver Diskette for Window...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории