Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Two speaker (Default) d. Click “Four speaker” item. C. Four Speaker Application The four speaker function will only support in application software that use Microsoft DirectX and Creative EAX. For example, the game titles, software DVD player and MP3 player. Those software support Microsoft DirectX, so they can support four speaker output. 44 6VXDC7 Motherboard SPDIF Introduction A. What is SPDIF? The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby digital decoder. B. How to use SPDIF? a. Press your mouse right button in “My Computer” and then select the “Properties” item. b. Click “Device Manager” item. 45 Four Speaker & SPDIF Introduction c. Press “Sound, video and game controllers” item and then select the “Creative Sound Blaster PCI128” item. d. Press “Settings” item and then select the “Output Mode” item. 46 6VXDC7 Motherboard e. Click “Digital” item, Line Out will be change to SPDIF Out. f. Recommend you to select “Autosense”, it will auto detect the audio jack you plug in to Line Out is mono or stereo, and then change to SPDIF Out or Speaker out automatically. 47 Memory Installation 48 Memory Installation The motherboard has 4 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets. Install memory in any combination table: Location 168-pin SDRAM DIMM Modules Note DIMM1 Single – Sided (Bank 0,1) Double – Sided DIMM2 Single – Sided (Bank 2,3) Double – Sided DIMM3 Single – Sided DIMM4 have only single-sided (Bank 4,5) Double – Sided DIMM4 must be empty DIMM4 Single – Sided DIMM3 have only single-sided (Bank 4,5) Double – Sided DIMM3 must be empty Total System Memory (Max 1.5GB) .Supports 16 / 32 / 64 / 128 / 256/ 512 MB SDRAM DIMM Modules. 6VXDC7 Motherboard 49 .. Page Index for BIOS Setup Page The Main Menu P.51 Standard CMOS Setup P.53 BIOS Features Setup P.56 Chipset Features Setup P.58 Power Management Setup P.61 PNP/ PCI Configuration P.64 Load BIOS Defaults P.66 Load Setup Defaults P.67 Integrated Peripherals P.68 Hardware Monitor P.71 Supervisor Password / User Password P.73 IDE HDD Auto Detection P.74 Save & Exit Setup P.75 Exit Without Saving P.76 BIOS Setup 50 BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Power ON the computer and press immediately will allow you to enter Setup. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" bottom on the system case. You may also restart by simultaneously press keys. CONTROL KEYS <^> Move to previous item